Hostname: page-component-68945f75b7-tmfhh Total loading time: 0 Render date: 2024-08-06T09:14:56.536Z Has data issue: false hasContentIssue false
  • English
  • Français

A Corrosion Localization Assessment of the Mild Steel Used for Nuclear Waste Package

Published online by Cambridge University Press:  21 February 2011

Masatsune Akashi ,
Takanori Fukuda  and
Hiroshi Yoneyama
Masatsune Akashi
Affiliation:
Ishikawajima-Harima Heavy Industries Co., Ltd., Research Institute, 3-1-15 Toyosu, Koto-ku, Tokyo 135, Japan
Takanori Fukuda
Affiliation:
Ishikawajima-Harima Heavy Industries Co., Ltd., Research Institute, 3-1-15 Toyosu, Koto-ku, Tokyo 135, Japan
Hiroshi Yoneyama
Affiliation:
Ishikawajima-Harima Heavy Industries Co., Ltd., Research Institute, 3-1-15 Toyosu, Koto-ku, Tokyo 135, Japan
Get access

Abstract

This paper describes a study of corrosion behavior of a mild steel as a candidate of the high-level nuclear waste package in the geological disposal situations, conducted to establish a model for estimating the corrosion allowance requirement to achieve the 1,000 year lifetime for the package. In several series of galvanostatic tests, the maximum penetration depth and the depth distribution were measured for each specimen with a sophisticated ultrasonic inspection technique. The Gumbel distribution model was successfully used in analyzing each set of data for the maximum penetration depth. Relations among the average penetration depth, the maximum penetration depth, and the corrosion allowance requirement were discussed.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 176: Symposium U – Scientific Basis for Nuclear Waste Management XIII , 1989 , 525
Copyright
Copyright © Materials Research Society 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Masamura, K. and Matsushima, I.: Proc. 47th JSCE Symp., Jap. Soc. Corr. Eng., p.31 (1983).Google Scholar
[2] Nakayama, G., Miyokawa, K. and Akashi, M.: Proc. 36th Ann. Symp. on Corr. and Protec., Jap. Soc. Corr. Eng., p.459 (1989).Google Scholar
[3] Marsh, G.P. and Taylor, K.J.: Corr. Sci., 28, 289 (1988).Google Scholar
[4] Tsujikawa, S., Akashi, M., Ishikawa, Y., Sakai, J., Furuya, S., Miyoshi, Y. and Yamamoto, K.: Q and A's in Corrosion Engineering, ed. by Jap. Soc. Corr. Eng., Maruzen (1988).Google Scholar
[5] Stern, M.: J. Electrochem. Soc., 102, 609 (1955).Google Scholar
[6] Matsushima, I.: Proc. 2nd Japan-USSR Corr. Seminar, Jap. Soc. Corr. Eng., p.308 (1980).Google Scholar
[7] Gumbel, E. J.: Statistics of Extremes, Columbia Univ. Press (1958).Google Scholar
[8] Aziz, P.M.: Corrosion, 12, 495t (1956).Google Scholar
[9] Eldredge, G.G.: ibid., 13, 51t (1957).Google Scholar
[10] Finley, H.H. and Toncre, A.C.: Mater. Prot., 3[9], 29 (1964).Google Scholar
[11] Ishikawa, Y.: BOSHOKU GIJUTSU, 28, 278 (1979).Google Scholar
[12] Kowaka, M., Tsuge, H., Akashi, M., Masamura, K. and Ishimoto, H.: An Introduction to the Life Predictionof Plant Materials, ed. by Jap. Soc. Corr. Eng., Maruzen (1984).Google Scholar
[13] Shibata, T.: Proc. 73rd JSCE Symp., Jap. Soc. Corr. Eng., p.1 (1988).Google Scholar
[14] Tsuge, H., Akashi, M., Ikematsu, K., Nakajima, H., Saitoh, N. and Miyake, Y. ibid., p.93 (1988); Micro-Computer Code “EVAN”, Maruzen (1989).Google Scholar
[15] Lieblein, J.: Nat. Advisory Committee for Aeronautics, TN-3053 (1954).Google Scholar
[16] White, J. S.: Ind. Math., 14, 21 (1964).Google Scholar
[17] Akashi, M.: q.v.[13], p.81.Google Scholar
[18] Maruyama, T. and Kawai, Y.: OYO TOKEIGAKU, 10, 165 (1982).Google Scholar