Hostname: page-component-68945f75b7-z8dg2 Total loading time: 0 Render date: 2024-08-06T02:16:45.311Z Has data issue: false hasContentIssue false
  • English
  • Français

Crystalline Thin and/or Thick Film of Perovskite-Type Oxides by Hydrothermal Electrochemical Techniques

Published online by Cambridge University Press:  25 February 2011

Masahiro Yoshimura
Masahiro Yoshimura*
Affiliation:
Research Laboratory of Engineering Materials, Tokyo Institute of Technology, Nagatsuta, Midori, Yokohama, 227, Japan
Get access

Abstract

Well crystallized polycrystalline perovskite-type oxide thin and/or thick films were prepared at sufficiently low temperatures by newly developed “hydrothermal electrochemical techniques” where metals were electrochemically oxidized and reacted with some components in hydrothermal solutions. BaTiO3 films 70 to 300 nm thick were formed in Ba(OH)2 solution at 100–200°C under saturation vapor pressure on the Ti substrate and Ti deposited glass substrates. The electrical current enhanced to thicken their films. SrTiO3, BaFeO3 and LiNbO3 films were also prepared.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 271: Symposium N – Better Ceramics Through Chemistry V , 1992 , 457
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Ceramic Thin and Thick Films, Ceramic Trnsactons, vol. 11, edited by Hiremath, B., (American Ceramic Society, OH, 1990).Google Scholar
2. Ferroelectric Films, Ceramics Transactions, vol. 25, edited by Bhalla, A. S. and Nair, K. M., (American Ceramic Society, OH, 1992).Google Scholar
3. Yoo, S. E., Yoshimura, M. and Sōmiya, S., Sintering 87, Proceedings vol. 1, edited by Somiya, S., Shimada, M., Yoshimura, M., and Watanabe, R., (Elsevier, 1988), pp. 108–13.Google Scholar
4. Yoo, S. E., Yoshimura, M. and Sō;miya, S., J. Mater. Sci. Lett., 8 [5] (1989). PP. 530–32.CrossRefGoogle Scholar
5. Yoshimura, M., Yoo, S. E., Hayashi, M. and Ishizawa, N., Jpn. J. Appl. Phys., 28 [11] (1989), L2007–09.Google Scholar
6. Yoshimura, M., Yoo, S. E., Hayashi, M. and Ishizawa, N., Microelectronic Systems, Ceramic Transactions, vol. 15, Ed. Nair, K. M., Pohanka, R. and Buchanan, R. C., (The Am. Ceram. Soc. 1990), PP. 427–436.Google Scholar
7. Ishizawa, N., Yoo, S. E., Hayashi, M. and Yoshimura, M., Ferroelectric Thin Films, (Mater. Res. Soc. Proc. 200 Pittsburgh, PA 1990), pp. 57–62.Google Scholar
8. Kajiyoshi, K., Ishizawa, N., and Yoshimura, M., J. Am. Ceram. Soc., 74 [2], (1991), pp. 364–74.Google Scholar
9. Kajiyoshi, K., N, Ishizawa, and Yoshimura, M., Jpn. J. Appl. Phvs., 30 [1B] (1991) pp. L120–123 Google Scholar
10. Kajiyoshi, K., Ishizawa, N., and Yoshimura, M., pp. 271–278 in Ref. [2].Google Scholar
11. Garcia - Verduch, A. and Lindner, R., Arkiv fr Kemi. 5, (1953) 313–16.Google Scholar
12. Ishizawa, N., Hayashi, M., Banno, H., Mizunuma, S., Yamaguchi, H., Yoo, S. E., and Yoshimura, M.. Report of Res. Lab. Eng. Mater., Tokyo Inst. Tech., 16, (1991). pp. 9–16.Google Scholar
13. Hayashi, M., Ishizawa, N., Yoo, S. E., and Yoshimura, M., J. Ceram. Soc. Jpn., 98 [8] (1990), pp. 931–33.Google Scholar
14. Ishizawa, N., Banno, H., Hayashi, M., Yoo, S. E. and Yoshimura, M.. Jpn. Appl. Phys., 29 [11], (1990), pp. 2467–72.Google Scholar
15. Yoo, S. E., Hayashi, M., Ishizawa, N. and Yoshimura, M., J. Am. Ceram. Soc. 76 [8] (1990), pp. 1561–63.Google Scholar
16. Yoshimura, M., Nakatsu, M., Yoo, S-E. and Ishizawa, N., to be published in Japan J. Appl. Phys.Google Scholar
17. Zanne, M. and Gletzer, C., Bull. Soc. Chem. France. 3 [5], (1971). pp. 1567–70. 1567–70(1971)Google Scholar
18. Yoshimura, M., Yoo, S-E., Kimura, H., Hayashi, M., and Ishizawa, N., Proc. of Fall Meeting of the Ceramics Society of Japan, (1989), pp. 28–29.Google Scholar
19. Yamaguchi, M., Kakihana, M., Yashima, M., and Yoshimura, M., Proc. of 30th Meeting of Basic Ceramics Science, (1992), pp. 103.Google Scholar