Hostname: page-component-7479d7b7d-fwgfc Total loading time: 0 Render date: 2024-07-13T16:02:22.777Z Has data issue: false hasContentIssue false
  • English
  • Français

Crystallization Behavior of Mechanically Alloyed Zr-Cu-Al-Ni Glass Composites Containing Second-Phase ZrC Particles

Published online by Cambridge University Press:  11 February 2011

S. Deledda ,
J. Eckert  and
L. Schultz
S. Deledda
Affiliation:
IFW Dresden, Institute of Metallic Materials, P.O. Box 270016, D-01171 Dresden, Germany
J. Eckert
Affiliation:
IFW Dresden, Institute of Metallic Materials, P.O. Box 270016, D-01171 Dresden, Germany
L. Schultz
Affiliation:
IFW Dresden, Institute of Metallic Materials, P.O. Box 270016, D-01171 Dresden, Germany
Get access

Abstract

We report on mechanical alloying of elemental powders with nominal composition Zr55Cu30Al10Ni5 together with up to 30 vol.% of ZrC particles which results in the formation of a metallic glass matrix in which the carbide particles are homogeneously dispersed and, at the same time, reduced to nanometer size. The thermal stability is investigated by isochronal differential scanning calorimetry and is found to be strongly affected by increasing the ZrC volume fraction. Comparison with calorimetric data for single-phase mechanically alloyed Zr-Cu-Al-Ni-C glassy powders suggests that dissolved carbon, originating from non-negligible ZrC-dissolution processes during mechanical alloying, is responsible for the changes in the glass transition and the crystallization behavior. Isothermal calorimetric data are also presented and discussed in the framework of the Johnson-Mehl-Avrami model. The carbon atoms dissolved in the glassy phase are suggested to slow down the kinetics of overall crystallization. On the other hand, for large ZrC volume fractions nucleation of crystalline phases is promoted by the second-phase particles and changes in the Avrami exponent from n = 4 to n = 3 suggest that the nucleation rate approaches zero after the early stages of crystallization.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 754: Symposium CC – Supercooled Liquids, Glass Transition and Bulk Metallic Glasses , 2002 , CC6.19
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Weeber, A.W. and Bakker, H., Physica B153, 93 (1988).Google Scholar
2. Schultz, L. and Eckert, J., Topics in Applied Physics 72, 69 (1994).Google Scholar
3. Seidel, M., Eckert, J., and Schultz, L., J. Appl. Phys. 77, 5446 (1995).Google Scholar
4. Eckert, J., Kübler, A., and Schultz, L., J. Appl. Phys. 85, 7112 (1999).Google Scholar
5. Eckert, J., Seidel, M., Kübler, A., Klement, U., and Schultz, L., Scripta Mater. 38, 595 (1998).Google Scholar
6. Deledda, S., Eckert, J., Schultz, L., Scripta Mater. 46, 31 (2003).Google Scholar
7. Choi-Yim, H. and Johnson, W.L., Appl. Phys. Lett. 71, 3808 (1997).Google Scholar
8. Kato, H. and Inoue, A., Mater. Trans. JIM 38, 793 (1997).Google Scholar
9. Johnson, W.A. and Mehl, R.F., Trans. Am. Inst. Min. Eng. 135, 416 (1939).Google Scholar
10. Avrami, M., J. Chem. Phys. 8, 177 (1940)Google Scholar
11. Deledda, S., Eckert, J., Schultz, L., Mater. Sci. Eng. A, accepted for pubblication.Google Scholar
12. Chen, F., Takagi, M., Imura, T., Kawamura, Y., Kato, H., and Inoue, A., Mater. Trans. JIM 43, 1 (2003).Google Scholar