Hostname: page-component-848d4c4894-r5zm4 Total loading time: 0 Render date: 2024-07-07T22:26:27.675Z Has data issue: false hasContentIssue false

Design and Synthesis of Vanadium Pentoxide/Polypyrrole Hybrid Electrochemical Materials

Published online by Cambridge University Press:  10 February 2011

J.H. Harreld
Affiliation:
Department of Materials Science and Engineering, University of California, Los Angeles, Los Angeles, CA 90095-1595
B. Dunn
Affiliation:
Department of Materials Science and Engineering, University of California, Los Angeles, Los Angeles, CA 90095-1595
W. Cheng
Affiliation:
Department of Materials Science and Engineering, University of California, Los Angeles, Los Angeles, CA 90095-1595
F. Leroux
Affiliation:
Department of Chemistry, University of Waterloo Waterloo, Ontario, Canada
L.F. Nazar
Affiliation:
Department of Chemistry, University of Waterloo Waterloo, Ontario, Canada
Get access

Abstract

Vanadium oxide/polypyrrole hybrid gels were synthesized by two different strategies. These approaches were focused on either the sequential or consecutive polymerization of the inorganic and organic networks. Both techniques led to monolithic hybrid aerogels. Aerogels synthesized by the consecutive network formation method (“cosynthesis”) with compositions of approximately [PPy]0.8V205intercalated nearly twice as much Li per V2O5(2·8·3·0 Li/V205) as non-hybridized V20, aerogel (1·5 Li/V205). When suitable oxidation and polymerization treatments were applied to the materials, their specific capacity remained reasonably high (180−190 mAh/g compared to 220 mAh/g exhibited by V205, aerogel).

Type
Research Article
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Scrosati, B. in Solid State Electrochemistry, edited by Bruce, P.G. (Cambridge University Press, Inc., Cambridge, Great Britain, 1995), p. 229.Google Scholar
2 Katz, B., Lui, W., Salloux, K., Chaput, F., Dunn, B., and Farrington, G.C. Mater. Res. Soc. Symp. Proc. 369, p. 211222 (1995).Google Scholar
3 Chaput, F., Dunn, B., Fuqua, P., and Salloux, K., J. Non-Cryst. Solids 188, p. 1118 (1995).Google Scholar
4 Wong, H.P. Dunn, B., Salloux, K., Chaput, F., and Breiter, M.W. Proceedings of the Thin Film Solid Ionic Devices and Materials Symposium 95–22, p. 4652 (1995).Google Scholar
5 Harreld, J.H. Dong, W., and Dunn, B., Mater. Res. Bull., in press.Google Scholar
6 Livage, J., Chem. Mater. 3, p. 578593 (1991).Google Scholar
7 Machida, S. and Miyata, S., Synth. Met. 31, p. 311318 (1989).10.1016/0379-6779(89)90798-4Google Scholar
8 Hirashima, H., Tsukimi, K., and Muratake, R., J. Ceram. Soc. Jap. 97, p.232235 (1989).Google Scholar
9 Hirashima, H., Sudoh, K., J. Non-Cryst. Solids 145, p. 5154 (1992).Google Scholar
10 Kuwabata, S. and Yoneyama, H., Mater. Res. Soc. Symp. Proc. 393, p. 125130 (1995).10.1557/PROC-393-125Google Scholar
11 Gemeay, A.H. Nishiyama, H., Kuwabata, S., and Yoneyama, H., J. Electrochem. Soc. 142, p. 41904195 (1995).10.1149/1.2048483Google Scholar
12 Tian, B. and Zerbi, G., J. Chem. Phys. 92, p. 38863891 (1990).10.1063/1.457794Google Scholar
13 Tian, B. and Zerbi, G., J. Chem. Phys. 92, p. 38923898 (1990).10.1063/1.457795Google Scholar
14 Novik, P. and Vielstich, W., J. Electrochem. Soc. 137, p. 10361042 (1990).10.1149/1.2086600Google Scholar
15 Novdk, P. and Vielstich, W., J. Electrochem. Soc. 137, p. 16811689 (1990).Google Scholar
16 Kakuda, S., Momma, T., Osaka, T., Appetecchi, G.B. and Scrosati, B., J. Electrochem. Soc. 142, p. L1–L2 (1995).Google Scholar
17 Myers, R.E. J. Electronic Mater. 15, p. 6169 (1986).10.1007/BF02649904Google Scholar
18 Wong, H.P. Dave, B.C. Leroux, F., Harreld, J.H. Dunn, B., and Nazar, L.F. J. Mater. Chem., in press.Google Scholar