Hostname: page-component-7479d7b7d-qlrfm Total loading time: 0 Render date: 2024-07-14T00:53:47.406Z Has data issue: false hasContentIssue false
  • English
  • Français

Design Principles for Microwave Heating and Sintering

Published online by Cambridge University Press:  28 February 2011

W.R. Tinga
W.R. Tinga*
Affiliation:
Electr. Engineering Dept., Univ. of Alberta, Edmonton, AB, T6J2G6
Get access

Abstract

Microwave heating equations are shown to have a complex functional dependence on material and process parameters such as composition, density, temperature, frequency and geometry. Power flow and its deposition in the presence of simple material shapes are used to illustrate relevant electromagnetic boundary conditions. Various types of applicator design using standing wave and travelling wave structures are discussed with respect to the results on power density, process efficiency and controllability. The problem of measuring and controlling the temperature inside a microwave system is addressed with emphasis on the use of thermocouples and infrared thermometry. Some of the problems peculiar to high temperature processing are considered. A review of the dielectric and magnetic property variation with temperature and frequency is given in order to understand the complexity and difficulty of uniformity of heating even with microwaves. The use of combination processing, for example, microwaves and infrared heating, is discussed. A short bibliography is presented listing some important publications in the field.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 60: Symposium L – Defect Properties and Processing of High-Technology Nonmetallic Materials , 1985 , 105
Copyright
Copyright © Materials Research Society 1986

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Jordan, E.L., Balmain, K.G., Electromagnetic Waves and Radiating Systems, (Prentice-Hall, 2nd edition, 1968).Google Scholar
2. Metaxas, A.C., J. of Microwave Power, 9(2), pp. 123–128, (1974).Google Scholar
3. VanKoughnett, A.L., Dunn, J.G., Woods, L.W., J. of Microwave Power, 9(3), pp. 195–204, (1974).Google Scholar
4. J. of Microwave Power, (International Microwave Power Institute, 301 Maple Ave. W., Tower Suite 520, Vienna, VA 22180), 1–20, (1969–1985).Google Scholar
5. Okress, E.C., Microwave Power Engineering, (Academic Press, 2 volumes)Google Scholar
6. Johnson, D.A., Traveling Wave and Resonant Microwave Heating Applicator Design, (Ph.D. Thesis, Univ. of Alberta, 1972).Google Scholar
7. Westphal, W.B., MIT Technical Rept. 182, (1963).Google Scholar
8. Westphal, W.B. and Sils, A., Airforce Materials Laboratory, Wright Patterson Airforce Base, Ohio, Tech. Repf. AFML-7R-72-39, (1972).Google Scholar
9. Sutton, P.M., Progress in Dielectrics, (John Wiley, 1960) pp. 115–164.Google Scholar
10. IEEE Trans, of the Microwave Theory and Technique group (1970–1985).Google Scholar
11. King, R.W.P., Proc. IEEE, 64(2), pp. 228–238, (1976).Google Scholar
12. Bowman, R.R., IEEE Transactions, MTT(24), 43–45, (1976).Google Scholar
13. Chakraborty, D.P., J. of Microwave Power, 17(1), pp. 17–28, (1982).Google Scholar
14. Bosisio, R.G., Dallaire, R. and Phromothansy, P., J. of Microwave Power, 12(4), pp. 309–317, (1977).Google Scholar
15. Araneta, J.C., Brodwin, M. and Kriegsmann, G.E., IEEE Trans., MTT–32(10), pp. 1328–1335, (1984).Google Scholar
16. Chiang, B., Hoyte, A., Int. Microwave Power Institute Symposium Proceedings, pp. 63–64, (1982).Google Scholar
17. Chen, Chao-Chun, IEEE Trans., MTT–21(1), pp. 1–6, (1973).Google Scholar
18. Otoshi, T.Y., IEEE Trans., MTT–20(3), pp. 235–236, (1972).Google Scholar