Hostname: page-component-84b7d79bbc-g78kv Total loading time: 0 Render date: 2024-07-26T07:15:51.418Z Has data issue: false hasContentIssue false
  • English
  • Français

Dispersoid Modification of Ti3Al-Nb Alloys

Published online by Cambridge University Press:  25 February 2011

R. G. Rowe ,
J. A. Sutliff  and
E. F. Koch
R. G. Rowe
Affiliation:
General Electric Corporate Research and Development Schenectady, NY 12301
J. A. Sutliff
Affiliation:
General Electric Corporate Research and Development Schenectady, NY 12301
E. F. Koch
Affiliation:
General Electric Corporate Research and Development Schenectady, NY 12301
Get access

Abstract

Titanium aluminide alloys with matrix compositions of essentially Ti3Al plus 0, 5, 7.5, and 10 a/o Nb and with and without rare earth elements for dispersoid formation were prepared. The alloys were rapidly solidified by melt spinning. Ribbon was consolidated by HIP and extrusion at temperatures below the beta transus temperatures of the alloys. The effects of processing conditions and dispersoid additions on room temperature ductility and fracture toughness were studied.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 58 , 1985 , 359
Copyright
Copyright © Materials Research Society 1986

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Sastry, S.M.L. and Lipsitt, H.A., Met Trans A, 8A, p. 1543, (1977).Google Scholar
[2] Williams, J.C. and Blackburn, M.J., In: Ordered Alloys Proc. 3rd Bolton Landing Conf., Sept. 1969, ed. Kear, B.H., Sims, C.T., Stoloff, N.S., and Westbrook, J.H., Claitors, 1970.Google Scholar
[3] Sastry, S.M.L. and Lipsitt, H.A., Titanium ‘80, Vol. 2, Proc. Int. Conf. on Titanium, Kyoto, Japan, May 1980, p. 1231, TMS/AIME, Warrendale, PA, 1980.Google Scholar
[4] Blackburn, M.J. and Smith, M.P., U.S. Patent #4,292,077, Sept. 29, 1981.Google Scholar
[5] Martin, P.L., Lipsitt, H.A., Nuhfer, N.T., and Williams, J.C., Titanium ‘80, Vol. 2, Proc. 4th Int Conf on Titanium, Kyoto, Japan, Ed: Kimura, K. and Izumi, O., Met Soc. AIME, Warrendale, Pa., 1980, p. 1245.Google Scholar
[6] Williams, J.C., in: Titanium and Titanium Alloys Ill, Proc. Third Int. Conf on Titanium, Moscow, USSR, 1976, p. 1477.Google Scholar
[7] Mendiratta, M.G., Sastry, S.M.L. and Smith, J.V., J. Matls Sci, 11, p. 1835 (1976).Google Scholar
[8] Gigliotti, M. F. X., Rowe, R. G., and Wasielewski, G. E., This conference proceedings.Google Scholar
[9] Sastry, S M L, Meschter, P J, and O'Neal, J E, Met Trans A, 15A, p. 1451 (1984)Google Scholar
[10] Konitzer, D. G. and Fraser, H.L., Mat. Res. Soc. Symp. Proc., 39, p. 437 (1985).Google Scholar
[11] Rowe, R. G. and Koch, E. F.To Be Published, Proc., 1986 ASM Conf on Rapidly Solidified Materials, San Diego, Ca., Feb, 1986, ASM, Metals Park, OhioGoogle Scholar
[12] Tutzauer, H., Esquinazi, P, Cruz, M E De La and Cruz, F De La, Rev. Sci. Instr., 51(4) p.546 (1980)Google Scholar
[13] Whang, S. R., Chi, C. S., and Lu, Y. Z. in: Rapidly Quenched Metals, Proc. Fifth Int Conf. on Rapidly Quenched Metals, Wurzburg, FRG, Sept, 1984, North Holland, Amsterdam, 1985.Google Scholar
[14] Sutliff, J. A. and Rowe, R. G., This conference proceedingsGoogle Scholar
[15] Selected Powder Diffraction Data for Metals and Alloys, JCPDS Int. Center for Diffraction Data, Swarthmore, Pa., 1978, index # 27-104, p. 834Google Scholar
[16] Dieter, G. E., Mechanical Metallurgy Mc Graw-Hill, New York, 1961, p. 559Google Scholar
[17] Annual Book of ASTM Standards, 1981, Amer Soc for Testing and Mat'ls., Phila., Pa., 1981, Part 10, p. 588Google Scholar
[18] Jones, A. R. in: Grain Boundary Structure and Kinetics, Proc. ASM Materials Science Seminar, Sept 1979, Milwaukee, Wis, Amer Soc for Metals, 1980, p. 379.Google Scholar