Hostname: page-component-77c89778f8-gq7q9 Total loading time: 0 Render date: 2024-07-20T15:17:46.111Z Has data issue: false hasContentIssue false

Donage and in Situ Annealing During Ion Implantation

Published online by Cambridge University Press:  15 February 2011

D. K. Sadana
Affiliation:
Lawrence Berkeley Laboratory And Department Of Materials Science And Mineral Engineering, University of California, Berkeley, CA 94720
J. Washburn
Affiliation:
Lawrence Berkeley Laboratory And Department Of Materials Science And Mineral Engineering, University of California, Berkeley, CA 94720
P. F. Byrne
Affiliation:
Department of Electrical Engineering and Computer Sciences, University of California, Berkeley, CA 94720
N. W. Cheung
Affiliation:
Department of Electrical Engineering and Computer Sciences, University of California, Berkeley, CA 94720
Get access

Abstract

Formation of amorphous (α) layers in Si during ion implantation in the energy range 100 KeV–11MeV and temperature range liquid nitrogen (LN)-100°C has been investigated.Cross-sectional transmission electron microscopy (XTEM) shows that buried amorphous layers can be created for both room temperature (RT) and LN temperature implants, with a wider 100 percent amorphous region for the LN cooled case. The relative narrowing of the α layer during RT implantation is attributed to in situ annealing. Implantation to the same fluence at temperatures above 100°C does not produce αlayers. To further investigate in situ annealing effects, specimens already containing buried α layers were further irradiated with ion beams in the temperature range RT-400°C. It was found that isolated small α zones (< 50 Å diameter)embedded in the crystalline matrix near the two α/c interfaces dissolved into the crystal but the thickness of the 100 percent α layer was not appreciably affected by further implantation at 200°C. A model for in situ annealing during implantation is presented.

Type
Research Article
Copyright
Copyright © Materials Research Society 1982

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Sadana, D. K., Strathman, M., Washburn, J. and Booker, G. R., J. Appl. Phys. 51 5718 (1980).Google Scholar
2. Washburn, J., Murty, C. S., Sadana, D., Byrne, P., Gronsky, R., Cheung, N. and Kilaas, R., Nucl. Inst. Meths. (in press).Google Scholar
3. Golecki, I., Chapman, G. E., Lau, S. S., Tsaur, B. Y. and Mayer, J. W., Phys.Lett. 71A 267 (1979).Google Scholar
4. Byrne, P. F., Cheung, N. W. and Sadana, D. K., App. Phys. Lett. 41 537 (1982).CrossRefGoogle Scholar
5. Morehead, F. F. Jr. and Crowder, B. L., Rad. Eff. 6 27 (1970).Google Scholar
6. Christel, L. A., Gibbons, J. F. and Sigmon, T. W., J. App. Phys. 52 7143 (1981).Google Scholar