Hostname: page-component-84b7d79bbc-x5cpj Total loading time: 0 Render date: 2024-07-27T23:21:27.444Z Has data issue: false hasContentIssue false
  • English
  • Français

Effect of Ambient Atmosphere on Thin Film Reaction of Si3N4 with Ti

Published online by Cambridge University Press:  21 February 2011

Seshu B. Desu  and
J. Ashley Taylor
Seshu B. Desu
Affiliation:
Department of Materials Engineering, Virginia Polytechnic Institute and State University, Blacksburg VA 24061
J. Ashley Taylor
Affiliation:
AT&T Bell Laboratories, 555 Union Boulevard, Allentown, PA 18103
Get access

Abstract

The reaction of sputtered deposited Ti films of 100 nm thick with low pressure chemical vapor deposited Si3N4 films (300 nm thick) was studied in N2 or Ar, in a rapid thermal annealer. Reactions are followed using x-ray diffraction, Auger electron spectroscopy, and transmission electron microscopy. In argon, the Si3N4 and Ti reaction at low temperatures led to the product formation of two layer structure (TiN/Ti5Si3), with some contaminant oxygen and nitrogen released from the reaction uniformly dissolved throughout the remaining unreacted Ti. At higher temperatures, a three layer structure, TiN/TixSiy/TiN, on unreacted Si3N4 was developed. With increasing temperature the value of x and y decreased from 5 to 0 and 3 to 1, respectively. Reactions in N2 ambient, irrespective of temperature, always produced the three layer structure, but the thickness of TixSiy layer was much smaller than that produced in argon ambient for the corresponding temperatures. The reaction mechanism can be explained in terms of relative diffusion coefficients and the stability of the interfaces.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 170: Symposium N – Interfaces in Composites , 1989 , 161
Copyright
Copyright © Materials Research Society 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1) Santella, M., Adv.Ceram.Mater., 3, 457 (1988).Google Scholar
2) Kang, S., Dunn, E.M., Silverman, J.H., and Kim, H.J., Am.Ceram.Soc.Bull., 68, 1608 (1989).Google Scholar
3) Yu.S., Borisov, Borisova, A.L., Yu.A., Kocherzhinskii, and Shishkin, E.A., Poroshkovaya Metallurgiya 183, 63 (1978).Google Scholar
4) Beyers, R., Sinclair, R., and Thomas, M.E., J.Vac.Sci.Technol. B2, 781 (1984).Google Scholar
5) Morgan, A.E., Broadbent, E.K., and Sadana, D.K., Appl.Phys.Lett., 49, 1236 (1986).Google Scholar
6) Barbour, J.C., Kupier, A.E., Willemsen, M.F.C.., and Reader, A.H., Appl.Phys.Lett., 50, 953 (1987).Google Scholar
7) Desu, S.B. and Taylor, J.A., J.Am.Ceram.Soc., in press.Google Scholar
8) Taylor, J.A. and Desu, S.B., J.Am.Ceram.Soc., 72, 1947 (1989).Google Scholar
9) Holmberg, B., Acta.Chem.Scand., 16, 1245 and 1255 (1962).Google Scholar