Hostname: page-component-77c89778f8-vpsfw Total loading time: 0 Render date: 2024-07-16T22:36:52.223Z Has data issue: false hasContentIssue false
  • English
  • Français

EFFECT OF FROTHER (MIBC) ADDITION ON THE CHARACTERISTICS OF MICROBUBBLES GENERATED BY AIR DISSOLVED NUCLEATION

Published online by Cambridge University Press:  24 February 2012

Estrella Martínez-Ramos ,
Roberto Pérez-Garibay  and
Jorge Rubio-Rojas
Estrella Martínez-Ramos
Affiliation:
CINVESTAV-IPN Unidad Saltillo, Carr. Saltillo-Monterrey km 13, Ramos Arizpe, Coah. México
Roberto Pérez-Garibay
Affiliation:
CINVESTAV-IPN Unidad Saltillo, Carr. Saltillo-Monterrey km 13, Ramos Arizpe, Coah. México
Jorge Rubio-Rojas
Affiliation:
Universidad Federal do Rio Grande do Sul, Porto Alegre, Brasil
Get access

Abstract

An identification of the characteristics of microbbubles dispersion is presented in this paper, when frother addition (MIBC) is modified in a biphasic system (air-water). Sauter diameter (d32), gas flow rate (Jg), superficial area flow density of the microbubbles (Sb) and air holdup (εg) are the measured variables in this research work. The studied frother additions were 0, 10 and 20 ppm. Similar to conventional bubble sizes, it was observed also, that air holdup increases with the air flow rate. The linear relationship between εg and Sb permits to conclude that superficial area flow density, a variable difficult to measure directly, may be estimated if air gas holdup is known. Furthermore, the experimental results showed that frother addition (MIBC) reduced the Sauter diameter, increasing all other variables.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1380 , 2012 , imrc2011-1380-s21-full016
Copyright
Copyright © Materials Research Society 2012

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

BIBLIOGRAPHY

Ahmed, N., Johnson, G.J., 1989. Flotation kinetics. Mineral Processing and Extractive Metallurgy Review 5, pp. 77–99.Google Scholar
Gomez, C.O., Finch, J.A. (2007) Gas dispersion measurements in flotation cells. Int. J. Miner. Process. 84. pp. 51–58Google Scholar
Matiolo, E., Testa, F., Yianatos, J. and Rubio, J. (2011), On the gas dispersión measurments in the collection zone of flotation columns, Departamento de Engenharia de Minas PPGEM-LTM, Rio Grande do Sul. International Journal of Mineral Processing.Google Scholar
Gorain, B.K., Franzidis, J.P., Manlapig, E.V., 1997. Studies on impeller type, impeller speed and air flow rate in an industrial flotation cell—Part 4: effect of bubble surface area flux on flotation performance. Minerals Engineering 10. pp. 367–379.Google Scholar
Gurol, M. D., Nekouinaini, S. 1984. Kinetics Benhaviour of Ozone in Aqueous Solutions of Substituted Phenols, Industrial Engineering Chemical Fundamentals 23: pp.54–60Google Scholar
http://rsb.info.nih.gov/ij/download.html.Google Scholar
Libra, J.A. (1993) Stripping of Organic Compounds in an Aerated Stirred Tank Reactor Rodrigues, R. T., Rubio, J. (2003), New Basis for measuring the size distribution of bubbles, Minerals Engineering 16. pp. 757–765.Google Scholar
Tavera, F.J., Finch, J.A. and Gomez, C.O. (1995) A Conductivity Probe for On-Line Measurement of Gas Holdup in Collection Zone of Flotation Columns. Report submitted at the MITEC Project 91P13, Flotation Columns: Measurements and Control.Google Scholar
Zlokarnik, M. (1979) Eignung und Leistungsfahigkeit von Volumenbeluftern fur biologische Abwasserreinigungsanlagen. Korrespondenz Abwasser, 27: pp.194–209Google Scholar