Hostname: page-component-848d4c4894-xm8r8 Total loading time: 0 Render date: 2024-07-03T06:27:39.079Z Has data issue: false hasContentIssue false
  • English
  • Français

Effect of Stainless Steel Can/Glass-ceramic Interaction Layer on Aqueous Durability

Published online by Cambridge University Press:  19 October 2011

Peter McGlinn ,
Yingjie Zhang ,
Huijun Li  and
Timothy E. Payne
Peter McGlinn
Affiliation:
pjm@ansto.gov.au, Australian Nuclear Science & Technology Organisation, Institute of Materials & Engineering Science, New Illawarra Road, Lucas Heights, 2234, Australia, 61 2 9717 9093, 61 2 9543 7179
Yingjie Zhang
Affiliation:
yzx@ansto.gov.au, Australian Nuclear Science & Technology Organisation, New Illawarra Road, Lucas Heights, N/A, Australia
Huijun Li
Affiliation:
hlx@ansto.gov.au, Australian Nuclear Science & Technology Organisation, New Illawarra Road, Lucas Heights, N/A, Australia
Timothy E. Payne
Affiliation:
tep@ansto.gov.au, Australian Nuclear Science & Technology Organisation, New Illawarra Road, Lucas Heights, N/A, Australia
Get access

Abstract

Calcined high-level radioactive waste (HLW) stored at the Idaho National Laboratory (INL) will eventually be immobilised in a suitable wasteform before disposal. A tailored glass-ceramic wasteform, produced by hot isostatic pressing in stainless steel (SS) cans, has been developed at ANSTO as a cost-saving alternative to glass which would improve waste loading and density, and reduce waste volume. We have studied the SS/wasteform interactions under HIPing conditions to understand whether such interactions would have any detrimental effect on long-term wasteform stability. This has been demonstrated by carrying out aqueous durability tests, under near-neutral and alkaline conditions, on the wasteform at the interaction layer, and on the wasteform distal to this reaction edge. Reaction during HIPing resulted in Cr diffusion from the can wall into the wasteform, however without any detectable detrimental impact on the HIP can or the aqueous durability of the wasteform.

Keywords

ceramichot isostatic pressing (HIP)surface reaction
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 985: Symposium NN – Scientific Basis for Nuclear Waste Management XXX , 2006 , 0985-NN04-07
Copyright
Copyright © Materials Research Society 2007

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Staiger, M. D., “Calcine Waste Storage at the Idaho Nuclear Technology and Engineering Center”, INEEL/EXT-98-00455 (1999).Google Scholar
2. Begg, B. D., Day, R. A., Moricca, S., Stewart, M. W. A. and Vance, E. R., Low-risk wasteforms to lock up high-level nuclear waste, paper presented at WM'05, February 27 - March 3, Tucson, AZ, USA.Google Scholar
3. Day, R. A., Ferenczy, J., Drabarek, E., Advocat, T., Fillet, C., Lacombe, J., Ladirat, C., Veyer, C., Quang, R. Do and Thomasson, J., Glass-ceramics in a cold-crucible melter: the optimum combination for greater waste processing efficiency, WM'03 conference, February 23-27, 2003, Tucson, AZ, USA.Google Scholar
4. Lumpkin, G. R., Smith, K. L., Blackford, M. G., Giere, R. and Williams, C. T., Micron, 25 (1994), 6, 581–87.Google Scholar
5. ASTM C 1220 – 98. “Standard Test Method for Static Leaching of Monolithic Wasteforms for Disposal of Radioactive Waste”.ASTM International. 1998.Google Scholar
6. Zhang, Y., Li, H., McGlinn, P. J., Yang, B. and Begg, B. D., Stainless steel/glass-ceramic interactions under hot isostatic pressing (HIPing) conditions. Submitted to Journal of Nuclear Materials (November, 2006).Google Scholar