Hostname: page-component-7479d7b7d-t6hkb Total loading time: 0 Render date: 2024-07-13T17:50:30.585Z Has data issue: false hasContentIssue false
  • English
  • Français

Effective Transverse Electrical Permittivities of Plain Weave, Twill Weave and Satin Fabric Composites

Published online by Cambridge University Press:  10 February 2011

T.-W. Chou  and
Q-G. Ning
T.-W. Chou
Affiliation:
Center for Composite Materials and Department of Mechanical Engineering, University of Delaware, Newark, DE 19716
Q-G. Ning
Affiliation:
Center for Composite Materials and Department of Mechanical Engineering, University of Delaware, Newark, DE 19716
Get access

Abstract

This paper reports the analytical prediction of effective transverse electrical permittivities of plain weave, twill weave, 4-harness irregular satin, as well as 5-harness and 8-harness satin fabric composites with lossy constituents. Analytical solutions of the effective properties are presented. Numerical examples are given to illustrate the effects of fiber volume fraction and fabric architecture on the composite effective transverse dielectric behavior. Key words: electrical permittivity, plain weave, twill weave, satin weave, fabric composite, analytical solution.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 411: Symposium T – Electricaly-Based Microstructural Characterization , 1995 , 381
Copyright
Copyright © Materials Research Society 1996

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Chou, T.-W. and Ning, Q.-G., Proceedings of the International Conference on Design and Manufacturing Using Composites, edited by Hoa, S. V., Sih, G. C., and Pindera, J. T., (Montreal, Canada 1994), pp. 222–235.Google Scholar
2. Chou, T.-W. and Ning, Q.-G., Proceedings of the Tenth International Conference on Composite Materials IV, edited by Poursartip, A. and Street, K. (Whistler, Canada 1995), pp. 465–471.Google Scholar
3. Ning, Q.-G. and Chou, T.-W., J. Mater. Res., submitted for publication.Google Scholar
4. Hashin, Z., J. Appl. Mech. 50, pp. 481–505 (1983).Google Scholar
5. Schulgasser, K. and Hashin, Z., J. Appl. Phys. 47, pp. 424–427 (1976).Google Scholar
6. Agarwal, R. K. and Dasgupta, A., J. Elec. Packaging 115, pp. 219–224 (1993).Google Scholar
7. Ning, Q.-G. and Chou, T.-W., Acta Metall. Mater., submitted for publication.Google Scholar