Hostname: page-component-7bb8b95d7b-495rp Total loading time: 0 Render date: 2024-09-16T19:45:48.697Z Has data issue: false hasContentIssue false

Effects of Microstructure on Oxygen Permeation in Some Perovskite Oxides

Published online by Cambridge University Press:  10 February 2011

K. Zhang
Affiliation:
Materials Research Science and Engineering Center, University of Houston Houston, TX 77204
Y. L. Yang
Affiliation:
Materials Research Science and Engineering Center, University of Houston Houston, TX 77204
A. J. Jacobson
Affiliation:
Materials Research Science and Engineering Center, University of Houston Houston, TX 77204
K. Salama
Affiliation:
Materials Research Science and Engineering Center, University of Houston Houston, TX 77204
Get access

Abstract

The effects of microstructure on the oxygen permeation in SrCo0.8Fe0.2O3-δ(SCFO) and La0.2 Sr0.8 Fe0.8Cr0.2 O3 (LSFCO) was investigated using disc samples fabricated under different processing conditions. The microstructure of LSFCO remained unchanged when the sintering temperature was increased from 1300 to 1450 °C, but the average grain size of SCFO increased considerably when the sintering temperature was increased from 930 to 1200 °C. The change in grain size was found to have a strong effect on the oxygen permeation flux in SCFO, which increased considerably as the grain size was decreased. This indicates that the contribution of the grain boundary diffusion to the steady state oxygen flux in SCFO is substantial and grain boundaries provide faster diffusion paths in oxygen permeation through the samples.

Type
Research Article
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Ma, B., Balachandran, U., Park, J.-H., and Segre, C. U., Solid State Ionics, 83, 65 (1996).Google Scholar
2. Minh, N. Q., J. Am. Ceram. Soc., 76, 563 (1993).Google Scholar
3. Teraoka, Y., Nobunaga, T., and Yamazoe, N., Chem. Lett., 83, 503 (1988).Google Scholar
4. Teraoka, Y., Zhang, H. -M.. Furukawa, S., and Yamazoe, N., Chem. Lett., 80, 1743 (1985).Google Scholar
5. Kruidhof, H., Bouwmeester, H. J. M., Doorn, R. H. E. V. and Burggraaf, A. L., Solid State Ionics, 63–65, 816 (1993).Google Scholar
6. Qiu, L., Lee, T. H., Liu, L. M., Yang, Y. L., and Jacobson, A. J., Solid State Ionics, 76, 321 (1995).Google Scholar
7. Van Hassel, B. A., Kawada, T., Sakai, N., Yokokawa, H., and Dokiya, M., Solid State Ionics, 66, 41 (1993).Google Scholar
8. Lee, T. H., Yang, Y. L., Jacobson, A. J., Abeles, B. and Milner, S., Solid State Ionics, 100, 77 (1997).10.1016/S0167-2738(97)00257-9Google Scholar
9. Sutton, A. P. and Balluffi, R. W., in Interfaces in Crystalline Materials (Oxford Science Publications, London, 1995) p. 467.Google Scholar
10. Badwal, S. P. S., and Drennan, J., J. Mater. Sci., 22, 3231 (1987).10.1007/BF01161187Google Scholar
11. Kawada, T., Fiorita, T., Sakai, N., Yokokawa, H., and Dokiya, M., Solid State Ionics, 79, 201 (1995).10.1016/0167-2738(95)00062-BGoogle Scholar
12. Zhang, K., Yang, Y. L., Ponnusamy, D., Jacobson, A. J., and Salama, K., Effect of Microstructure on Oxygen Permeation in SrCo0.8Fe0.2O3-δ, submitted to J. Mater. Sci‥Google Scholar