Hostname: page-component-84b7d79bbc-dwq4g Total loading time: 0 Render date: 2024-07-31T13:21:56.283Z Has data issue: false hasContentIssue false
  • English
  • Français

Effects of Y and Zr Dopants on Grain Boundary Structure in Creep Resistant Polycrystalline Alumina

Published online by Cambridge University Press:  21 March 2011

G. S. Cargill III ,
C. M. Wang ,
J. M. Rickman ,
H. M. Chan  and
M. P. Harmer
G. S. Cargill III
Affiliation:
Department of Materials Science and Engineering Lehigh University Bethlehem, PA 18015, USA
C. M. Wang
Affiliation:
Department of Materials Science and Engineering Lehigh University Bethlehem, PA 18015, USA
J. M. Rickman
Affiliation:
Department of Materials Science and Engineering Lehigh University Bethlehem, PA 18015, USA
H. M. Chan
Affiliation:
Department of Materials Science and Engineering Lehigh University Bethlehem, PA 18015, USA
M. P. Harmer
Affiliation:
Department of Materials Science and Engineering Lehigh University Bethlehem, PA 18015, USA
Get access

Abstract

Dopants Y and Zr at 100 ppm levels in high purity, micron grain-size polycrystalline alumina are mainly segregated to the alumina grain boundaries and strongly reduce high temperature creep. Information about this segregation has come from high resolution STEM composition mapping experiments. Information about local structural surroundings of the dopant atoms has come from EXAFS experiments, and information about local bonding of the dopant atoms has come from XANES experiments. Structural models for dopant grain boundary segregation provide a context for these experimental results and for effects of dopant incorporation on grain boundary mediated transport. Recent experimental and theoretical results are discussed in this paper.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 654: Symposia AA – Structure-Property Relationships of Oxide Surfaces & Interfaces , 2000 , AA1.1.1
Copyright
Copyright © Materials Research Society 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 French, J. D., Zhao, J., Harmer, M. P., Chan, H. M., and Miller, G. A., J. Amer. Ceram. Soc., 77, 2857 (1994).Google Scholar
2 Wakai, F., Nagano, T., and Iga, T., J. Amer. Ceram. Soc., 80, 2361 (1997).Google Scholar
3 Cho, J., Harmer, M. P., Chan, H. M., Rickman, J. M., and Thompson, A. M., J. Amer. Ceram. Soc., 80, 1013 (1997).Google Scholar
4 Lartigue, S., Carry, S., and Priester, L., J. Phys. (Paris) C1, 51, 985 (1990).Google Scholar
5 Wang, C. M., Cargill, G. S. III, Harmer, M. P., Chan, H. M., and Cho, J., Acta Mater., 47, 3411 (1999).Google Scholar
6 Wang, C. M., Cargill, G. S. III, Chan, H. M., and Harmer, M. P., Acta Mater., 48, 2579–91 (2000).Google Scholar
7 Bruley, J., Cho, J., Chan, H. M., Harmer, M. P., and Rickman J, M, J. Am. Ceram. Soc., 82, 2865 (1999).Google Scholar
8 Wang, C. M., Cargill, G. S. III, Chan, H. M., and Harmer, M. P., Acta Mater., to be published.Google Scholar