Hostname: page-component-77c89778f8-9q27g Total loading time: 0 Render date: 2024-07-18T09:18:48.357Z Has data issue: false hasContentIssue false
  • English
  • Français

Epitaxial Dielectric Planarization for Multilayer HTSC Structures

Published online by Cambridge University Press:  15 February 2011

Bertha P. Chang ,
Paul C. Mcintyre ,
Neville Sonnenberg  and
Michael J. Cima
Bertha P. Chang
Affiliation:
Ceramics Processing Research Laboratory, Massachusetts Institute of Technology, Cambridge, MA.
Paul C. Mcintyre
Affiliation:
Ceramics Processing Research Laboratory, Massachusetts Institute of Technology, Cambridge, MA.
Neville Sonnenberg
Affiliation:
Ceramics Processing Research Laboratory, Massachusetts Institute of Technology, Cambridge, MA.
Michael J. Cima
Affiliation:
Ceramics Processing Research Laboratory, Massachusetts Institute of Technology, Cambridge, MA.
Get access

Abstract

Yttria-stabilized ZrO2 (YSZ) and CeO2 thin films were deposited on patterned (001) YSZ and (001) LaAIO3 substrates, respectively, using ion beam assisted deposition (IBAD) at normal incidence and an ion beam energy of 500eV. All deposition took place at 600°C. An initial 1000Å thick layer was evaporated at 0.2Å/s before beginning IBAD at rates of 0.3Å/s for YSZ and between 0.8Å/s and 1.2Å/s for CeO2. X-ray diffraction shows the YSZ films to grow epitaxially. The planarization mechanism for IBAD YSZ is similar to that previously observed for if-bias sputtering. CeO2 grows epitaxially on LaA103 but a second polycrystalline phase grows preferentially over the surface steps and inhibits the planarization process. The emergence of this phase appears to be related to highly incoherent growth of CeO2 over the stepped edges, which in turn is a function of the large lattice mismatch between CeO2 and LaA1O3 in the [001] direction.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 341: Symposium F – Epitaxial Oxide Thin Films and Heterostructures , 1994 , 151
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Giess, E.A., Sandstrom, R.L., Gallagher, W.J., Gupta, A., Shinde, S.L., Cook, R.F., Cooper, E.I., O'Sullivan, E.J.M., Roldan, J.M., Segmiiller, A.P., Angilello, J., IBM J. Res. Dev. 34, 916 (1990).Google Scholar
2. Inoue, T., Yamamoto, Y., Koyama, S., Suzuki, S., and Ueda, Y., Appl. Phys. Lett. 56, 1332 (1990).Google Scholar
3. Sonnenberg, N., Longo, A.S., Cima, M.J., Chang, B.P., Ressler, K.G., McIntyre, P.C., and Liu, Y.P., J. Appl. Phys. 74, 1027 (1993).Google Scholar
4. Ting, C.Y., Vivalda, V.J., and Schaefer, H.G., J. Vac. Sci. Technol. 15, 1105 (1978).Google Scholar
5. Chang, B.P., Sonnenberg, N., McIntyre, P.C., Cima, M.J., Sun, J.Z., and Yu-Jahnes, L.S., Mater. Res. Soc. Symp. Proc. 317 (1993); in press.Google Scholar
6. McIntyre, P.C., Chang, B.P., Sonnenberg, N., and Cima, M.J., submitted to J. Electronic Mater. (1994).Google Scholar
7. Berkstresser, G.W., Valentino, A.J., and Brandle, C.D., J. Crystal Growth, 109, 467 (1991).Google Scholar