Hostname: page-component-5c6d5d7d68-xq9c7 Total loading time: 0 Render date: 2024-08-24T07:20:54.046Z Has data issue: false hasContentIssue false
  • English
  • Français

Evaluation of Design and Performance of a Cryogenic Mems Micropump Realized with Si-Based Diaphragm Using Combination of Zygo/Wyko Interferometer and Raman Spectroscopy

Published online by Cambridge University Press:  01 February 2011

Yi Zhao ,
Daryl Ludlow ,
Biao Li  and
Xin Zhang
Yi Zhao
Affiliation:
Department of Manufacturing Engineering and Fraunhofer USA Center for Manufacturing, Innovation, Boston University, Boston, MA 02215, USA
Daryl Ludlow
Affiliation:
Department of Manufacturing Engineering and Fraunhofer USA Center for Manufacturing, Innovation, Boston University, Boston, MA 02215, USA
Biao Li
Affiliation:
Department of Manufacturing Engineering and Fraunhofer USA Center for Manufacturing, Innovation, Boston University, Boston, MA 02215, USA
Xin Zhang
Affiliation:
Department of Manufacturing Engineering and Fraunhofer USA Center for Manufacturing, Innovation, Boston University, Boston, MA 02215, USA
Get access

Abstract

This paper reports work concerning a silicon-based micro pump for use in a cryogenic cooling system. The diaphragm deflection, which is critical for the control of pumping capacity, was accurately derived using a combination of ZYGO and WYKO interferometer. The relationship between the pumping capacity and differential pressure was further achieved. Stress distribution was obtained using Micro Raman spectroscopy. It was found that Young's modulus derived from the maximum deflection increases with decreasing temperature. The compressive stress concentrates at the edge centers; whereas the tensile stress occurs at the diaphragm center. There is a fairly good match between the theoretical predications and experimental observations.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 782: Symposium A – Micro- and Nanosystems , 2003 , A5.52
Copyright
Copyright © Materials Research Society 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Zimbelman, D., Goddard Space Flight Center: NASA, 2002.Google Scholar
[2] Walker, D., Waltham: Foster Miller, 2002.Google Scholar
[3] Forster, F., Bardell, R., Afromowitz, M., Sharma, N., Proceedings of the ASME Fluids Engineering Division, 1995 IMECE, Vol. 234, pp. 39–44., 1995 Google Scholar
[4] Gerlach, T. and Wurmus, H., Sensors and Actuators A (Physical), Vol. 50, no. 1–2, pp. 135–140., 1995 Google Scholar
[5] González, Ulises F., Moussa, Walied A., ALGOR0903. July, 2003 Google Scholar
[6] Brunner, K., Abstreiter, G., Kolbesen, B. O. and Meul, H. W., Appl. Surf. Sci., 39, pp 116, 1989 Google Scholar
[7] Brar, VW, Samsonidze, Ge G, Dresselhaus, G, etc., Physics Review B, Vol. 66, 2002 Google Scholar
[8] Wolf, Ingrid De and Maes, H. E., Jones, Stephen K., J. Appl. Phys. 79 (9), 1 May 1996 Google Scholar
[9] Malhaire, C., Guyot, Y., Le Berre, M., Mat. Res. Soc. Symp. Proc. Vol. 444, pp129–184, 1997 Google Scholar