Hostname: page-component-5c6d5d7d68-vt8vv Total loading time: 0.001 Render date: 2024-08-22T05:40:19.621Z Has data issue: false hasContentIssue false
  • English
  • Français

Evolution of the Contact Area During an Indentation Process

Published online by Cambridge University Press:  15 February 2011

Kangjie Li ,
T. W. Wu  and
J. C. M. Li
Kangjie Li
Affiliation:
Materials Science Program, Department of Mechanical Engineering, University of Rochester, Rochester, NY 14627
T. W. Wu
Affiliation:
IBM Research Division, Almaden Research Center, San Jose, CA 95120
J. C. M. Li
Affiliation:
Materials Science Program, Department of Mechanical Engineering, University of Rochester, Rochester, NY 14627
Get access

Abstract

The evolution of the contact area during an indentation process has been examined by an a.c. technique and also by finite element analysis on five different bulk materials. The consistency of the results obtained by the two approaches not only show the validity and advantage of the a.c. technique but also corroborate the applicability of the elastic contact equation.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 436: Symposium CC – Thin Films Stresses and Mechanical Properties VI , 1996 , 165
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Frolich, F., Grau, P. and Grellmann, W., Phys. Stat. Sol.(a) 42, 79–89 (1977).Google Scholar
2. Newey, D., Wilkins, M.A. and Pollock, H.M., J. Phys. E: Sci. Instrum. 15, 119–122 (1982).Google Scholar
3. Pethica, J., Hutchings, R. and Oliver, W.C., Philos. Mag. A48, 593 (1983).Google Scholar
4. Sneddon, I.N., Int. J. Eng. Sci. 3, 47–57 (1965).Google Scholar
5. Pharr, G.M., Oliver, W.C., and Brotzen, F.R., J. Mater. Res. 7, 613–617 (1992).Google Scholar
6. King, R.B., Int. J. Solids Structures 3, 1657 (1987).Google Scholar
7. Doerner, M.F. and Nix, W.D., J. Mater. Res. 1, 601–609 (1986).Google Scholar
8. Oliver, W.C. and Pharr, G.M., J. Mater. Res. 7, 1564–1583 (1992).Google Scholar
9. Laursen, T.A. and Simo, J.C., J. Mater. Res. 7, 618–626 (1992).Google Scholar
10. Pethica, J.B. and Oliver, W.C., in Thin Films: Stresses and Mechanical Properties, edited by Bravman, J.C., Nix, W.D., Barnett, D.M., and Smith, D.A. (Mater. Res. Soc. Symp. Proc. 130, 13–23 (1989)).Google Scholar
11. Wu, T.W., J. Mater. Res. 6,407–426 (1991).Google Scholar
12. Wu, T.W., Mater. Chem. & Phys. 33, 15–30 (1993).Google Scholar