Crossref Citations
This article has been cited by the following publications. This list is generated based on data provided by
Crossref.
Wilde, J.
Becker, K.
Thoben, M.
Blum, W.
Jupitz, T.
Guozhong Wang
and
Cheng, Z.N.
2000.
Rate dependent constitutive relations based on Anand model for 92.5Pb5Sn2.5Ag solder.
IEEE Transactions on Advanced Packaging,
Vol. 23,
Issue. 3,
p.
408.
Feustel, F.
Wiese, S.
and
Meusel, E.
2000.
Time-dependent material modeling for finite element analyses of flip chips.
p.
1548.
Cheng, Z.N.
Wang, G.Z.
Chen, L.
Wilde, J.
and
Becker, K.
2000.
Viscoplastic Anand model for solder alloys and its application.
Soldering & Surface Mount Technology,
Vol. 12,
Issue. 2,
p.
31.
Wiese, S.
Jakschik, S.
Feustel, F.
and
Meusel, E.
2001.
Fracture behaviour of flip chip solder joints.
p.
1299.
Wiese, S.
Schubert, A.
Walter, H.
Dukek, R.
Feustel, F.
Meusel, E.
and
Michel, B.
2001.
Constitutive behaviour of lead-free solders vs. lead-containing solders-experiments on bulk specimens and flip-chip joints.
p.
890.
Rzepka, S.
Hofer, E.
Simon, J.
Meusel, E.
and
Reichl, H.
2001.
Stress analysis and design optimization of a wafer-level CSP by FEM simulations and experiments.
p.
704.
Wang, G. Z.
Cheng, Z. N.
Becker, K.
and
Wilde, J.
2001.
Applying Anand Model to Represent the Viscoplastic Deformation Behavior of Solder Alloys .
Journal of Electronic Packaging,
Vol. 123,
Issue. 3,
p.
247.
Rzepka, S.
Hofer, E.
Simon, E.
Meusel, E.
and
Reichl, H.
2002.
Stress analysis and design optimization of a wafer-level CSP by FEM simulations and experiments.
IEEE Transactions on Electronics Packaging Manufacturing,
Vol. 25,
Issue. 2,
p.
127.
Wiese , S.
and
Meusel , E.
2003.
Characterization of Lead-Free Solders in Flip Chip Joints .
Journal of Electronic Packaging,
Vol. 125,
Issue. 4,
p.
531.
Schaefer, H.
Maurieschat, U.
Schimanski, H.
Poech, M.H.
Hoefer, E.
and
Harder, T.
2004.
Studies on underfilling components with area array solder terminals in surface mount technology.
p.
153.
Rollig, M.
Wiese, S.
and
Wolter, K.-J.
2006.
Extraction of material parameters for creep experiments on real solder-joints by FE analysis.
p.
1.
Wiese, S.
Mueller, M.
Panchenko, I.
Metasch, R.
Roellig, M.
and
Wolter, K-J.
2010.
The scaling effect on microstructure and creep properties of Sn-based solders.
p.
1.
Wiese, S.
Mueller, M.
Panchenko, I.
Metasch, R.
and
Wolter, K-J.
2011.
The creep behaviour and microstructure of ultra small solder joints.
p.
1/6.
Gharaibeh, Mohammad A
2023.
Nonlinear finite element simulations on the mechanical response of the isothermally aged lead-free solders.
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications,
Vol. 237,
Issue. 11,
p.
2421.
Gharaibeh, Mohammad A.
and
Al-Oqla, Faris M.
2023.
Numerical evaluation of the mechanical response of Sn-Ag-Cu lead-free solders of various silver contents.
Soldering & Surface Mount Technology,
Vol. 35,
Issue. 5,
p.
319.
Gharaibeh, Mohammad A.
and
Wilde, Jürgen
2023.
Numerical Evaluation of Sintered Silver Die Attachments Based on Different Material Parameters and Creep Constitutive Models.
IEEE Transactions on Components, Packaging and Manufacturing Technology,
Vol. 13,
Issue. 8,
p.
1187.