Hostname: page-component-84b7d79bbc-lrf7s Total loading time: 0 Render date: 2024-07-29T08:31:35.792Z Has data issue: false hasContentIssue false
  • English
  • Français

Flat-Top Polygonal Temperature Profiles by Laser Beams

Published online by Cambridge University Press:  21 February 2011

Y.F. Lu
Y.F. Lu*
Affiliation:
Department of Electrical Engineering, National University of Singapore, 10 Kent Ridge Crescent, Singapore 0511.
Get access

Abstract

A method was proposed to generate flat-top polygonal temperature distributions in substrates from a Gaussian-shaped laser source. The original Gaussian beam is equally and diametrically separated into several portions and is then rearranged so that the each portion has its peak intensity allocated toward outside. This can be realized by a symmetrical multi-facet prism. A mathematical model was derived to calculate the temperature rise induced the rearranged portions of the laser beam. Flat-top polygonal temperature profiles with two, three, four and six corners have been investigated by numerical calculations. It is shown that flat-top polygonal temperature distributions can be obtained by this method if the distance between the peaks of the beam portions is arranged to be certain proportions to the original Gaussian beam. It is also found the shape of the temperature profile is almost with the same size as the original Gaussian beam size and does not depend on the incident laser power and the substrate material.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 354: Symposium A – Beam Solid Interactions for Materials Synthesis and Characterization , 1994 , 669
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Ehrlich, D.J. and Tsao, J.Y., Laser Microfabrication - Thin Film Processes and Lithography, (Academic, San Diego, 1989)Google Scholar
2 Lax, M., J. Appl. Phys. 48, 3919(1977)Google Scholar
3 Lax, M., Appl. Phys. Lett. 33, 786(1978)Google Scholar
4 Cline, H.E. and Anthony, T. R., J. Appl. Phys. 48, 3895(1977)Google Scholar
5 Moody, J.E. and Hendel, R.H., J. Appl. Phys. 53, 4364(1982)Google Scholar
6 Lu, Y.F., J. Appl. Phys. 71, 3701(1992)Google Scholar
7 Lu, Y.F., J. Appl. Phys. 72, 4839(1992)Google Scholar
8 Lu, Y.F., Appl. Phys. Lett. 61, 2482(1992)Google Scholar
9 Kawamura, Y., Itagaki, Y., Toyoda, K., and Namba, S., Optics Comm. 48, 44(1983)Google Scholar
10 Shafer, D., Optics and Laser Technology, 1,159(1982)Google Scholar