Hostname: page-component-84b7d79bbc-g78kv Total loading time: 0 Render date: 2024-07-31T19:16:05.345Z Has data issue: false hasContentIssue false
  • English
  • Français

Fluxless Microjoining by Au-In-Ni Isothermal Solidification

Published online by Cambridge University Press:  10 February 2011

M. Waelti ,
N. Schneeberger ,
O. Brand  and
H. Baltes
M. Waelti
Affiliation:
Physical Electronics Laboratory, ETH Zurich, Hoenggerberg HTP-H6, CH-8093 Zurich, Switzerland
N. Schneeberger
Affiliation:
Physical Electronics Laboratory, ETH Zurich, Hoenggerberg HTP-H6, CH-8093 Zurich, Switzerland
O. Brand
Affiliation:
Physical Electronics Laboratory, ETH Zurich, Hoenggerberg HTP-H6, CH-8093 Zurich, Switzerland
H. Baltes
Affiliation:
Physical Electronics Laboratory, ETH Zurich, Hoenggerberg HTP-H6, CH-8093 Zurich, Switzerland
Get access

Abstract

A reliable, fluxless microjoining technique based on isothermal solidification is reported. The Au-In-Ni system has been chosen for bonding, because gold is often applied for wafer bumping, and Ni is commonly used for substrate plating. To demonstrate the potential of this microjoining scheme, optical filter have been directly attached to a smart CMOS thermoelectric IR system. Since further packaging of the microsystem includes SMT assembly, the bond has to withstand subsequent SnPb reflow-soldering.

The influence of bonding time and temperature on the bond was investigated. Phase formation and transformation were analyzed by light and scanning electron microscopy (SEM). Bonding performed at temperatures below 200°C remained stable even after multiple soldering cycles with peak temperatures of 235°C. The shear strength of the bonds was found to be more than 70 MPa. Long term stability was confirmed by extended anneal at 160°C. The method is generally well suited for processes involving sequences of joining steps, and for bonds demanding high strength and high thermal stability at low bonding temperature.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 605: Symposium MM – Materials Science of Microelectromechanical Systems Devices II , 1999 , 183
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Bernstein, L., “Semiconductor Joining by the Solid-Liquid Interdiffusion (SLID) Process”, in Journal of Electrochemical Society, Vol. 113, 1966, pp 1282–1288.Google Scholar
[2] Hieber, H., Swiderski, A., Bader, S., “Heat-Resistant Contacts with Use of Liquid Phase Transition”, in Proc. of 7th European Hybrid Microelectronics Conference, 1989.Google Scholar
[3] Petersen, B.-C., Harder, T., “Low-Temperature Bonding Using Intermetallic Phases”, in Proc. of 11th European Microelectronics Conference, Venice, 1997.Google Scholar
[4] Chen, Y.-C., Lee, S.J., Lee, C.C., “High Temperature Cu-Sn Joints Manufactured by a 250°C Fluxless Bonding Process” in IEEE Multi-Chip Module Conference, 1995, pp. 206–211.Google Scholar
[5] Schaufelbühl, A., Schneeberger, N., Münch, U., Paul, O., Baltes, H., Menolfi, C., Huang, Q., “Uncooled Low-Cost Thermal Imager Using Micromachined CMOS Intergrated Sensor Array”, in Transducers 99, Digest of Technical Papers, 1999, pp. 606–609.Google Scholar
[6] Prince, A., Raynor, G.V., Evans, D.S., Phase Diagrams of Ternary Gold Alloys, The Institute of Metals, London, 1990.Google Scholar
[7] Humpston, G., Lewis, B., “Soldering with Indium-Based Solders – Intermetallic Phase Formation”, in Proc. of 11th European Microelectronics Conference, Venice, 1997.Google Scholar