Hostname: page-component-7479d7b7d-t6hkb Total loading time: 0 Render date: 2024-07-13T18:42:57.569Z Has data issue: false hasContentIssue false
  • English
  • Français

Fracture-Exafs: A New Method for the Study of Interfaces in thin films and Polycrystalline Materials

Published online by Cambridge University Press:  16 February 2011

E. V. Barrera ,
Benji Maruyama  and
S. M. Heald
E. V. Barrera
Affiliation:
Division of Applied Physics, Department of Applied Science, Brookhaven National Laboratory, Upton, NY 11973
Benji Maruyama
Affiliation:
NRL-NRC Assoicate, Naval Research Laboratory, Washington, DC 20375-5000
S. M. Heald
Affiliation:
Division of Applied Physics, Department of Applied Science, Brookhaven National Laboratory, Upton, NY 11973
Get access

Abstract

Fracture-EXAFS is a technique, proposed here for the first time, which combines an appropriate mechanical test with EXAFS analysis to investigate the atomic processes involved in the fracture process. Fracture-EXAFS builds upon the fracture-Auger electron spectroscopy technique, which was used to study the elemental composition of fracture surfaces, and has yielded significant insight into phenomena such as grain boundary embrittlement and composite interface fracture. Extended X-ray Absorption Fine Structure (EXAFS) analysis yields structural, as well as chemical information. The identity, coordination number, position and degree of disorder of atoms in the vicinity of interfaces and surfaces can be determined. Thus, EXAFS comparison of the imminent (latent) fracture surface to the fracture surface can yield structural, as well as chemical information about the fracture process. In this preliminary report, emphasis will be given to the application of Fracture-EXAFS to the study of interfaces in thin films. Discussion will also include the use of Fracture-EXAFS to study grain boundaries in polycrystalline materials.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 188: Symposium K – Thin Films: Stresses and Mechanical Properties II , 1990 , 275
Copyright
Copyright © Materials Research Society 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Marcus, H. L. and Palmberg, P. W., Trans. TMS-AIME 245, 1664 (1969).Google Scholar
2. Palmberg, P. W. and Marcus, H. L., Trans. ASM 62, 1016 (1969).Google Scholar
3. Lytle, F. W. et al. , Phys. Rev. B, 11(12), 4825 (1975).Google Scholar
4. Stern, E. A. et al. , Ch10, Basic Principles and Applications of EXAFS, in Handbook on Synchrotron Radiation, Koch, E. E., ed., Vol. 1, p. 955, North-Holland Pub. Co., 1983.Google Scholar
5. Heald, S. M. et al. , Faraday Discuss. Chem. Soc. 89, 1 (1990).Google Scholar
6. Barrera, E. V. et al. , Mater. Sci. and Eng. A117, 45 (1989).Google Scholar
7. Pardee, W. J. et al. , Scripta Metall. 14, 1333(1989).Google Scholar
8. Hastings, J. B., in EXAFS Spectorscopy, Tech. and App., Teo, B. K., and Joy, D. C., eds. p. 171, Plenum Press, New York, 1981.Google Scholar
9. Citrin, P. H. et al. , Phys. Rev. Lett. 45, 1948 (1980).Google Scholar
10. Stöhr, J. et al. , Phys. Rev. Lett., 54, 1256 (1985).Google Scholar
11. Stöhr, J. et al. , Phys. Rev. Lett., 55, 1468 (1985).Google Scholar
12. Fine, M. E., Introduction to Phase Transformations In Condensed Systems, p. 15, MacMillan, New York (1964). C. J. McMahon, et. al., ScriptaGoogle Scholar
13. Metall. 12, 785 (1978).Google Scholar
14. Jokl, M. J. et al. , Acta Metall. 28, 1479 (1980).Google Scholar