Hostname: page-component-84b7d79bbc-rnpqb Total loading time: 0 Render date: 2024-07-28T21:31:06.257Z Has data issue: false hasContentIssue false
  • English
  • Français

Fundamental Studies of TiN Film Growth by CVD From Ti(N M e2)4 and Ammonia

Published online by Cambridge University Press:  22 February 2011

J. A. Prybyla ,
C.-M. Chiang  and
L. H. Dubois
J. A. Prybyla
Affiliation:
AT&T Bell Laboratories, Murray Hill, New Jersey 07974
C.-M. Chiang
Affiliation:
AT&T Bell Laboratories, Murray Hill, New Jersey 07974
L. H. Dubois
Affiliation:
AT&T Bell Laboratories, Murray Hill, New Jersey 07974
Get access

Abstract

TiN films were grown by CVD from Ti(N M e2)4 and ammonia using a novel gas delivery system which allowed the sample to be kept in high vacuum while the reactants were mixed at elevated pressures. The object was to study fundamental chemistries and growth properties. We obtained clean (<5% carbon), near-stoichiometric (Ti:N = 1.15+/-0.1) TiN films. The gas phase chemistry was studied by mass spectrometry while the films were analyzed in situ by Auger electron spectroscopy (AES), and then removed for Rutherford backscattering (RBS) analysis. Film quality was studied as a functionof reactant ratio, substrate temperature, and reactant gas pressure. We obtained definitive information on the growth mechanism. Isotopic substituiton experiments establish that a rapid transami-nation reaction occurs in the gas phase. Mass spectrometry experiments indicate that the reactive intermediate is polymeric, consisting of Ti, N, H, arid perhapscarbon. Growth on patterned wafers shows that this intermediate has a high sticking coefficient and a low surface mobility at 300°C. These findings are considered in terms ofthe potential of this precursor system to be used in manufacturing.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 282: Symposium E – Chemical Perspectives of Microelectronic Materials III , 1992 , 287
Copyright
Copyright © Materials Research Society 1993

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Sugiyama, K., Pac, S., Takahashi, Y., and Motojima, S., J. Electrochem. Soc. 122, 1545 (1975).Google Scholar
2. Fix, R. M., Gordon, R. G., and Hoffman, D. M., Chem. Mater. 2, 235 (1990); Mat. Res. Soc. Symp. Proc. 168, 357 (1990).Google Scholar
3. Ishihara, K., Yamazaki, K., Hamada, H., Kamisako, K., and Tarui, Y., Jpn. J. Appl. Phys. 29, 2103 (1990).Google Scholar
4. Musher, J. N. and Gordon, R. G., J. Electron. Mat. 20, 1105 (1991).Google Scholar
5. Dubois, L. H., Zegarski, B.R., and Girolami, G.S., J. Electrochem. Soc. 139, 3603 (1992).Google Scholar
6. Katz, A., Feigold, A., Nakahara, S., Pearton, S. J., Lane, E., Geva, M., Stevie, F. A., and Jones, K., J. Appl. Phys. 71, 993 (1992).Google Scholar
7. Prybyla, J. A., Chiang, C.-M., and Dubois, L. H., submitted to J. Electrochem. Soc.Google Scholar
8. Dubois, L. H., J. Vac. Sci. Technol. A 6, 162 (1988).Google Scholar
9. Chiang, C.-M. and Dubois, L. H., manuscript in preparation.Google Scholar
10. Cyanamid, Technical Data Sheet.Google Scholar
11. See, for example, Thomkins, H. G., J. Appl. Phys. 70, 3876 (1991).Google Scholar
12. Bradley, D. C. and Torrible, E. G., Can. J. Chem. 41, 134 (1963).Google Scholar
13. See, for example, Rey, J. C., Cheng, L.-Y., McVittie, J. P., and Saraswat, K. C., J. Vac. Sci. Technol. A 9, 1083 (1991).Google Scholar