Hostname: page-component-84b7d79bbc-lrf7s Total loading time: 0 Render date: 2024-07-25T13:15:19.869Z Has data issue: false hasContentIssue false
  • English
  • Français

High Dose Ion Implantation for the Synthesis of Si1−xGex Alloys

Published online by Cambridge University Press:  26 February 2011

D. J. Howard ,
D. C. Paine  and
N. G. Stoffel
D. J. Howard
Affiliation:
Division of Engineering, Brown University, Providence, RI 02912
D. C. Paine
Affiliation:
Division of Engineering, Brown University, Providence, RI 02912
N. G. Stoffel
Affiliation:
Bellcore, Red Bank, New Jersey 07701
Get access

Abstract

High dose ion implantation followed by solid phase epitaxy has been investigated for use in the synthesis of defect-free graded alloys of Si1−xGex. Two implanted alloy systems were studied: (i) 200 keV 74Ge into <001> Si to form Si-rich alloys and (ii) 150 keV 29Si into <001> Ge to form Ge-rich alloys. After regrowth by solid phase epitaxy the Ge-rich alloys are strained in tension while the Si-rich alloys are in compression and, as a result, strain relaxation is anticipated above a critical dose. We report that solid phase epitaxy at 550°C following implantation of Si into <001> Ge at an energy of 150 keV allowed the defect-free regrowth of alloys with peak concentrations of 11 ± 2 at. % Si (fluence of 7.7 × l016/cm2). Ge was implanted at 200 keV into <001> Si to a peak concentration of 7 at. % (fluence of 3.6 × l016/cm2) and was regrown without the introduction of defects whereas samples implanted to a peak concentration of 13 at. % (fluence of 5.3 × l016/cm2) contained a high density of stacking faults. These experimental observations are compared to theoretical predictions that are based on the strain energy approach.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 201: Symposium A – Surface Chemistry and Beam-Solid Interactions , 1990 , 247
Copyright
Copyright © Materials Research Society 1991

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Patton, G.L., Iyer, S.S., Delage, S.L., Tiwari, S., Stork, J.M.C., IEEE ED Lett., 9(4), 165 (1988).Google Scholar
2. Patton, G.L., Comfort, J.H., Meyerson, B.S., Crabbe, E.F., Scilla, G.J., De Fresart, E., Stork, J.C., Sun, J.Y.-C., Harame, D.L., and Burghartz, J.N., IEEE ED Lett., 11 (4), 171 (1990).Google Scholar
3. Paine, D.C., Howard, D.J., Stoffel, N.G., and Horton, J.A., J.M.R., 5 (5), 1023 (1990).Google Scholar
4. Matthews, J.W., Epitaxial Growth, Matthews, J.W. ed., (Academic Press, 1974) p. 559.Google Scholar
5. Freund, L.B., J. Appl. Mech., 54, 553 (1987).Google Scholar
6. Howard, D.J., Paine, D.C., Stoffel, N.G., MRS Symposium Proceedings, vol 187, 1990.Google Scholar
7. Alexander, H., Dislocations in Covalent Materials, Ch. 35 from Dislocations in Solids, Nabarro, F.R.N. ed., (Elsevier Science Publishers B.V., 1986) p. 135.Google Scholar
8. Hirth, J.P. and Lothe, J, Theory of Dislocations. 2nd edition, (Wiley Interscience, 1982) p. 313.Google Scholar
9. Burenkov, A.F., Komarov, F.F., Kumakhov, M.A., and Temkin, M.M., Tables of Ion Implantation Spacial Distributions, (Gordon and Breach Science Publishers, 1986) p. 107,192.Google Scholar