Hostname: page-component-77c89778f8-m42fx Total loading time: 0 Render date: 2024-07-17T18:49:30.386Z Has data issue: false hasContentIssue false
  • English
  • Français

Improvement in Platinum Silicidation for 0.8 m BICMOS Process

Published online by Cambridge University Press:  10 February 2011

Suketu Parikh ,
Gaurang Modi  and
Samuel Nagalingam
Suketu Parikh
Affiliation:
Silicon Systems Inc. 2300 Delaware Ave, SantaCruz, CA95060.
Gaurang Modi
Affiliation:
Silicon Systems Inc. 2300 Delaware Ave, SantaCruz, CA95060.
Samuel Nagalingam
Affiliation:
Silicon Systems Inc. 2300 Delaware Ave, SantaCruz, CA95060.
Get access

Abstract

Platinum Silicidation involves interdiffusion of Pt and Si which finally results in the formation of PtSi. The quality of Platinum Silicide strongly influences the electrical properties such as schottky barrier height and its contact resistance. We demonstrate a two step process using rapid thermal processing (RTP) with 400 °C 30 sec silicidation in N2 atmosphere, followed by 500 °C 30 sec oxidation in O2/N2 mix. The two temperature step process gave better electrical and material characteristics compared to a single step silicidation at 400°C with N2/O2 mix. The two step silicidation recipe also had lower sheet resistance, no unreacted platinum (based on X-ray diffraction analysis) and uniform SiO2 layer (based on Auger Electron Specrtroscopy) on top of silicide, to protect it from aqua regia.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 429: Symposium N – Rapid Thermal and Integrated Processing V , 1996 , 169
Copyright
Copyright © Materials Research Society 1996

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Reader, A. H., Ommen, A. H., Weijs, P.J. W., Walters, R.A. M., and Oostra, D. J., Rep. Prog. Phys. 56, 1397, (1992).Google Scholar
2. Ottivani, G., Thin Solid Film 130, 3 (1986).Google Scholar
3. Poate, J., Tu, K. N., and Mayer, J. W., in Thin Films: Interdiffusion and reactions, edited by Poate, J., Tu, K. N., and mayer, J. W., (Wiley, N. Y. 1978)Google Scholar
4. Nicolet, M. A. and Lau, S. S. in VLSI Microstructure Science, edited by Einspurch, N. G., Larrabee, G. B., pp. 130, (Acad Press 1983).Google Scholar
5. Chang, Chin An, Segmuller, A., Huang, H., Cunningham, B., Turene, F., Sugerman, A., and Totta, P. A., J. Electrochem Soc. 133(6), 1256 (1986).Google Scholar