Hostname: page-component-7bb8b95d7b-pwrkn Total loading time: 0 Render date: 2024-09-12T09:18:05.733Z Has data issue: false hasContentIssue false
  • English
  • Français

Improvement of Adhesion of Diamond Coatings to WC(CO) Tool Substrates

Published online by Cambridge University Press:  15 February 2011

W. D. Fan ,
K. Jagannadham  and
J. Narayan
W. D. Fan
Affiliation:
North Carolina State University, Department of Materials Science & Engineering, Raleigh, NC 27695–7916
K. Jagannadham
Affiliation:
North Carolina State University, Department of Materials Science & Engineering, Raleigh, NC 27695–7916
J. Narayan
Affiliation:
North Carolina State University, Department of Materials Science & Engineering, Raleigh, NC 27695–7916
Get access

Abstract

Adhesion of diamond coatings to cutting tool substrates is an important property that is needed to replace the polycrystalline diamond tools (PCD) in machine tool applications. The improvement in adhesion of diamond on WC(Co) tool substrates is brought about by formation of a composite layer. Composite layers made up of TiC or TiN and diamond were formed by laser physical vapor deposition of ceramic coatings and hot filament chemical vapor deposition of diamond films. A first layer of discontinuous diamond film on WC is embedded in the ceramic coatings followed by growth of a continuous diamond film that maintains continuity with the first diamond layer. The composite coatings were characterized by SEM and Raman spectroscopy. Adhesion and wear resistance of the diamond coatings were measured using a polishing wear test. The mechanisms of improvement in adhesion were analyzed by finite element modeling. Results show that TiC composite layers improve the adhesion of diamond coatings significantly. This improvement is considered to arise from the modification of the thermal stress at the interface between the diamond film and the WC(Co) tool substrate.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 363 , 1994 , 163
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Shibuki, K., Yagi, M., and Suzuki, T., Diamond Films and Technology, 3, 31 (1993).Google Scholar
2. Oakes, J., Pan, X.X., Haulner, R., and Lux, B., Surface and Coatings Technology, 47, 600 (1991).Google Scholar
3. Fan, W.D., Chen, X., Jagannadham, K., and Narayan, J., J. Mater. Res. 9 (11), 2850 (1994).Google Scholar
4. Nesladek, M., Spinnewyn, J., Asinari, C., Lebout, R., and Lorent, R., Diamond and Related Materials, 3, 98 (1994).Google Scholar
5. Fan, W.D., Jagannadham, K., and Narayan, J.. To be presented in the 1994 Fall Meeting of the Materials Research Society: Symposium B2Google Scholar
6. Bernardez, L.J. and McCarty, K.F., Diamond and Related Materials, 3, 22 (1994).Google Scholar
7. Thermal Expansion (Nonmetallic Solid, Thermophysical Properties of Matter, The TPRC Data Series, V. 13), edited by Touloukian, Y.S., Kirby, R.K., Taylor, R.E., and Lee, T.Y.R., (IFIIPlenum, New York-Washington, 1977)Google Scholar