Hostname: page-component-77c89778f8-n9wrp Total loading time: 0 Render date: 2024-07-16T13:01:52.291Z Has data issue: false hasContentIssue false

Improving the Thermal Stability of Photoresist Films by Ion Beam Irradiation

Published online by Cambridge University Press:  10 February 2011

F. C. Zawislak
Affiliation:
Instituto de Física, UFRGS, Caixa Postal 15051, 91501-970 Porto Alegre, Brasil
Irene T. S. Garcia
Affiliation:
PGCIMAT, UFRGS, Porto Alegre, Brasil
D. Samios
Affiliation:
Instituo de Química UFRGS, Porto Alegre, Brasil
D. L. Baptista
Affiliation:
Instituto de Física, UFRGS, Caixa Postal 15051, 91501-970 Porto Alegre, Brasil
P. F. P. Fichtner
Affiliation:
Escola de Engenharia, UFRGS, Porto Alegre, Brasil
E. Alves
Affiliation:
Instituto Tecnológico e Nuclear, Sacavém, Portugal
Maria F. Da Silva
Affiliation:
Instituto Tecnológico e Nuclear, Sacavém, Portugal
J. C. Soares
Affiliation:
Centro de Física Nuclear, UL, Lisboa, Portugal
Get access

Abstract

The thermal stability of ion irradiated 1.7 μm thick AZ-1350J photoresist films was investigated using the RBS and ERDA techniques to measure the composition of the irradiated and annealed films. The films have been irradiated with He, N and Ar ions at energies from 380 to 760 keV and fluences between 2 × 1015 and 1016 ions cm−2. A considerable increase in the thermal stability of the He irradiated film is observed from ≈200°C – when the non-irradiated film starts to decompose – to 400°C after the irradiation. The FTIR spectroscopy and the SEM observations were used to study the chemical structural changes and the surface morphology of the irradiated samples. The results are discussed in terms of the energy density deposited by the ions, the large loss of H during irradiation, and the resulting increase in cross-linking density.

Type
Research Article
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Venkatesan, T., Calcagno, L., Elman, B.S. and Foti, G., in Ion Beam Modification of Polymers, edited by Mazzoldi, P. and Arnold, G.W. (Elsevier, N.Y. 1987), p. 301.Google Scholar
2. Lee, E.H., Lewis, M.B., Blau, P.J., and Mansur, L.K., J. Mater. Res. 6, p. 610 (1991).Google Scholar
3. Rao, G.R. and Lee, E.H., J. Mater. Res. 11, p. 2661 (1996).Google Scholar
4. Behar, M., Amaral, L., Zawislak, F.C., Guimarães, R.B. and Fink, D., Nucl. Intrum. and Meth. B 46, p. 350 (1990).Google Scholar
5. Behar, M., Guimarães, R.B., Grande, P.L., Amaral, L., Biersack, J.P., Fink, D., Kaschny, J.R. and Zawislak, F.C., Phys. Rev. B 41, p. 6145 1990).Google Scholar
6. Maltez, R.L., Amaral, L., Behar, M. and Zawislak, F.C., Nucl. Intrum. and Meth. B 80/81, p. 1316 (1993).Google Scholar
7. Biersack, J.P. and Haggmark, L.G., Nucl. Instrum. and Meth. 174, p. 257 (1980).Google Scholar
8. Wang, Yongqiang, Mohite, S.S., Bridwell, L.B., Giedd, R.E. and Sofield, C.J., J. Mater. Res. 8, p. 388 (1993).Google Scholar
9. Hall, T.M., Wayner, A. and Thompson, L.F., J. Appl. Phys. 53, p. 3997 (1982).Google Scholar