Hostname: page-component-77c89778f8-7drxs Total loading time: 0 Render date: 2024-07-23T07:20:07.783Z Has data issue: false hasContentIssue false
  • English
  • Français

In Situ Design of Experiments for A Reactive Ion Etching Process

Published online by Cambridge University Press:  10 February 2011

Cecilia G. Galarza ,
Pete Klimecky ,
Pramod P. Khargonekar  and
Fred L. Terry Jr.
Cecilia G. Galarza
Affiliation:
Electrical Engineering and Computer Science Department University of Michigan, Ann Arbor, MI 48109-2122
Pete Klimecky
Affiliation:
Electrical Engineering and Computer Science Department University of Michigan, Ann Arbor, MI 48109-2122
Pramod P. Khargonekar
Affiliation:
Electrical Engineering and Computer Science Department University of Michigan, Ann Arbor, MI 48109-2122
Fred L. Terry Jr.
Affiliation:
Electrical Engineering and Computer Science Department University of Michigan, Ann Arbor, MI 48109-2122
Get access

Abstract

We introduce a new procedure to perform a design of experiments (DOE) for plasma etching processes. In particular, we use in situ etch rate estimations to maximize the number of observable setpoints during a single run of the etching process. This procedure is applied to characterize the spatial uniformity of a plasma chamber used in the manufacturing of flat panel displays.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 569: Symposium U – In Situ Process Diagnostics and Modelling , 1999 , 165
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Garvin, C., Grimard, D., and Grizzle, J., J. Vac. Sci. Technol. A 16,2,1998 Google Scholar
[2] Kong, W. and Terry, F. L. Jr., J. Vac. Sci. Technol. B., 1999 (submitted for publication)Google Scholar
[3] Vincent, T. L., Khargonekar, P. P., and Terry, F. L. Jr. in Diagnostic Techniques for Semiconductor Materials Processing II (Mater. Res. Soc. Symp. Proc. bf 406, Pittsburgh, PA, 1996) pp.87–93.Google Scholar
[4] Vincent, T. L., Khargonekar, P. P., and Terry, F. L. Jr., IEEE Trans. on Semi. Manuf.,10, 1, (1997).10.1109/66.554482Google Scholar
[5] Butle, S. W., Stefani, J., Sullivan, M., Maung, S., Barna, G., and Henck, S., J. Vac. Sci. Technol. AGoogle Scholar
[6] Urban, F. K. III, and Tabet, M. F., Thin Solid Films, 245, (1994), 167–173.10.1016/0040-6090(94)90894-XGoogle Scholar
[7] Baird, D. C., Experimentation : an introduction to measurement theory and experiment design, (Prentice Hall, Englewood Cliffs, N.J., 1995, 3rd. ed.).Google Scholar
[8] Anderson, B. and Moore, J., Optimal Filtering, (Prentice-Hall, Englewood Cliffs, N.J, 1979).Google Scholar
[9] Azzam, R. and Bashara, N., Ellipsometry and Polarized light, (North Holland, New York, 1989).Google Scholar