Hostname: page-component-5c6d5d7d68-txr5j Total loading time: 0 Render date: 2024-08-08T13:18:04.972Z Has data issue: false hasContentIssue false
  • English
  • Français

Influence of Grain Orientation on Friction and Wear Behavior in Quasicrystalline Alloys

Published online by Cambridge University Press:  17 March 2011

Alan Duckham ,
Dan Shechtman  and
Benjamin Grushko
Alan Duckham
Affiliation:
National Institute of Standards and Technology, MSEL, Gaithersburg, MD 20899
Dan Shechtman
Affiliation:
Department of Materials Engineering, Technion, Haifa, Israel
Benjamin Grushko
Affiliation:
Institute of Solid-State Research, Jülich, Germany
Get access

Abstract

The influence of grain orientation on the friction and wear behavior of single-phase quasicrystalline alloys is investigated. Pin-on-disc wear tests and friction coefficient measurements have been performed on bulk samples of icosahedral phase AlPdMn and decagonal phase AlNiCo alloys. Wear behavior has been evaluated by optical microscopy, scanning electron microscopy (SEM) and electron back-scattered diffraction (EBSD). Coefficient of friction values of the decagonal AlNiCo alloy are found to be widely scattered (between 0.03 and 0.55) compared to the far more consistent values of the icosahedral alloys. This is explained by considering the significant variation in wear behavior that is observed between different – sometimes adjacent – oriented grains in the decagonal specimens.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 643: Symposium K – Quasicrystals-Preparation, Properties, and Applications , 2000 , K8.1
Copyright
Copyright © Materials Research Society 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.Lang, C.I., Sordelet, D.J., Besser, M.F., Shechtman, D., Biancaniello, F.S. and Gonzalez, E.J., J. Mater. Res 15, 1894 (2000).Google Scholar
2.Kang, S.S., Dubois, J.M. and von, Stebut J., J. Mater. Res. 8, 2471 (1993).Google Scholar
3.Gellman, A., Mancinelli, C., Ko, J., this volume.Google Scholar
4. ASTM and ASM International, Friction and Wear Testing Source Book of Selected References, (West Conshohocken, PA, and Materials Park, OH, 1997) pp. 124–128.Google Scholar
5.Buckley, D.H., Surface Effects in Adhesion, Wear, and Lubrication, (Elsevier Scientific Publishing Company, Amsterdam, 1981) p. 211.Google Scholar
6.Wittman, R., Urban, K., Schandl, M. and Hornbogen, E., J. Mater. Res. 6, 1165 (1991).Google Scholar
7. Dian-lin, Zhang, Xiao-Chun, Cao, Yun-ping, Wang, Li, Lu, Xue-mei, Wang, Ma, X.L., and Kuo, K.H., Phys. Rev. Lett. 66, 2778 (1991).Google Scholar