Hostname: page-component-5c6d5d7d68-xq9c7 Total loading time: 0 Render date: 2024-08-15T07:20:02.642Z Has data issue: false hasContentIssue false
  • English
  • Français

Integration of Zinc Oxide Thin Films with Polyimide-based Structures

Published online by Cambridge University Press:  01 February 2011

Masashi Matsumura ,
Zvonimir Bandic  and
Renato P. Camata
Masashi Matsumura
Affiliation:
Department of Physics, University of Alabama at Birmingham, Birmingham, AL 35294, U.S.A.
Zvonimir Bandic
Affiliation:
Hitachi Global Storage Technologies, Inc., San Jose, CA 95120, U.S.A.
Renato P. Camata
Affiliation:
Department of Physics, University of Alabama at Birmingham, Birmingham, AL 35294, U.S.A.
Get access

Abstract

Zinc oxide (ZnO) films were deposited on polyimide-based substrates by pulsed laser deposition. The ZnO films and the underlying polymer layers were studied using Fourier Transform Infrared (FTIR) and Photoluminescence (PL) spectroscopies. FTIR measurements in structurally well-characterized samples exhibiting all X-ray reflections of crystalline hexagonal ZnO show absorbance bands around 405 cm-1(Zn-O stretching vibration) and 1110 cm-1 (in-plane C-H vibrations on aromatic rings of polyimide). Observed shifts in both absorption features as a function of deposition temperatures can probably be attributed to thermal stress in the layers. PL measurements showed broad spectra centered around 3.35 eV from ZnO excitonic emission and a broader PL band from 2.7 to 3.1 eV defect complex emissions. The appearance of these peaks was consistent for depositions of ZnO on non-organic substrates, which indicates that the integration of ZnO thin films on polymer based substrate preserved the characteristic optical properties of ZnO.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 869: Symposium D – Materials, Integration and Technology for Monolithic Instruments , 2005 , D1.7
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Kadota, M., and Minakata, M., IEEE Trans. Ultrason. Ferroelectr. Freq.Control 42, 345 (1995).Google Scholar
2 Joseph, M., Tabata, H., and Kawai, T., Appl. Phys. Lett., 74, 2534 (1999).Google Scholar
3 Hiramatsu, M., Imawda, K., Horio, N., and Nawata, M., J. Vac. Sci. Technol., A16, 669 (1998).Google Scholar
4 Jeong, W.-J. and Park, G.-C., Sol. Energy Mater. Sol. Cells 65, 37 (2001).Google Scholar
5 Matsubara, K., Fons, P., Iwata, K., Yamada, A., Sakurai, K., Tampo, H., Niki, S., Thin Solid Films, 431 369 (2003).Google Scholar
6 Hammer, P., Tokumoto, M. S., Santilli, C. V., Pulcinelli, S. H., Craievich, A. F., and Smith, A., J. Appl. Crystallography 36, 435 (2003).Google Scholar
7 Ohtomo, A., Tamura, K., Saikusa, K., Takahashi, K., Makino, T., Segawa, Y., Koinuma, H., and Kawasaki, M., Appl. Phys. Lett. 75, 2635 (1999).Google Scholar
8 Xiong, G., Wilkinson, J., Mischuck, B., Tüzemen, S., Ucer, K. B., and Williams, R. T., Appl. Phys. Lett. 80, 1195 (2002).Google Scholar
9 Ellmer, K., J. Phys. D: Appl. Phys. 33, R17 (2000).Google Scholar
10 Klett, A., Freudenstein, R., Plass, M. F., Kulisch, W., Surf. and Coatings Tech., 125, 190 (2000).Google Scholar
11 Gregoriu, V. G., Kandilioti, G., and Gatos, K. G., Vibrational Spec., 34, 47 (2004).Google Scholar
12 Tarte, P., Spect. Chemim. Acta 18, 467 (1961).Google Scholar
13 Matsumura, M., Camata, R. P., Thin Solid Films 476, 317 (2005).Google Scholar