Hostname: page-component-84b7d79bbc-2l2gl Total loading time: 0 Render date: 2024-07-30T05:24:54.951Z Has data issue: false hasContentIssue false
  • English
  • Français

Krf Excimer Laser Deposition of Titanium from Tici4

Published online by Cambridge University Press:  21 February 2011

R. Izquierdo ,
C. Lavoie  and
M. Meunier
R. Izquierdo
Affiliation:
Ecole Polytechnique de Montréal, Groupe des Couches Minces et Département de Génie Physique, Montréal, Canada
C. Lavoie
Affiliation:
Ecole Polytechnique de Montréal, Groupe des Couches Minces et Département de Génie Physique, Montréal, Canada
M. Meunier
Affiliation:
Ecole Polytechnique de Montréal, Groupe des Couches Minces et Département de Génie Physique, Montréal, Canada
Get access

Abstract

We have investigated the deposition of titanium lines from TiCl4 induced by KrF excimer laser (248 nm). Substrates are primarily LiNbO3, for the possible formation of Ti:LiNbO3 optical waveguides, as well as silicon and glass. Titanium lines contain [Cl] < 2 at% and are typically 200 to 1000 Angstroms thick with a width ranging from 3 to 20 μm. Results suggest that the process is controlled by photochemistry of TiCl4 but it is difficult at this point to assert which of the gas or adsorbed layer is the primary source of thin film growth.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 158: Symposium B – In-Situ Patterning: Selective Area Deposition and Etching , 1989 , 141
Copyright
Copyright © Materials Research Society 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Armenise, M.N., IEEE Proceedings 135, 85 (1988).Google Scholar
2. Fraser, D.B., in VLSI Technology. edited by Sze, S.M. (Mc Graw-Hill Book Company, NewYork, 1983), P. 347.Google Scholar
3. Tsao, J.Y., Becker, R.A., Ehrlich, D.J. and Leoneberger, F.J., Appl. Phys. Lett. 42, 559 (1983).Google Scholar
4. Braichotte, D. and Bergh, H van den, Appl. Phys. A45, 337 (1988).Google Scholar
5. Chretien, A. and Freundlich, W., in Nouveau Traitd de Chimie Minérale, edited by Cie, Masson et, Paris 1963), p. 1.Google Scholar
6. Rothschild, M., in Laser Microfabrication Thin Film Process and Lithography, edited by Ehrlich, D.J. and Tsao, J.Y. (Academic Press, San Diego, 1989), p. 163.Google Scholar
7. Sanderson, R.T., Chemical Bonds and Bonds Energy, 2nd ed. (Academic Press, NewYork, 1976), p.52.Google Scholar