Published online by Cambridge University Press: 01 January 1992
Two methods were used to measure grain-boundary inventories of 137Cs, 90Sr and 99Tc in used CANDU fuel, to corroborate source term estimates based on a fission gas release code. Used fuels were partially oxidized at 200°C in air to overall compositions of UO2+x (0.15≤ × ≤0.25) to expose UO2 grain boundaries, followed by leaching in aqueous solution. Only a fraction (2 to 18%) of the calculated gap + grain-boundary inventories for 37Cs was released. This suggests that the calculations overestimate Cs release or that oxidation does not expose all grain boundaries, or that Cs release from grain boundaries is slow. Release of 90Sr (0.01 to 0.7%) agreed reasonably well with the source term estimates (0.001 to 0.3%). Release of 99Tc (0.3 to 1.5%) suggests that the source term estimate for the upper boundary of 99Tc release (25%) may be too high. A second technique involved leaching of crushed and size-fractionated used fuel in either a static or dynamic system. A direct one-to-one correlation between calculated and measured gap + grain-boundary inventories for 137Cs was found for low- and medium-power fuels.
To send this article to your Kindle, first ensure no-reply@cambridge.org is added to your Approved Personal Document E-mail List under your Personal Document Settings on the Manage Your Content and Devices page of your Amazon account. Then enter the ‘name’ part of your Kindle email address below. Find out more about sending to your Kindle. Find out more about saving to your Kindle.
Note you can select to save to either the @free.kindle.com or @kindle.com variations. ‘@free.kindle.com’ emails are free but can only be saved to your device when it is connected to wi-fi. ‘@kindle.com’ emails can be delivered even when you are not connected to wi-fi, but note that service fees apply.
Find out more about the Kindle Personal Document Service.
To save this article to your Dropbox account, please select one or more formats and confirm that you agree to abide by our usage policies. If this is the first time you used this feature, you will be asked to authorise Cambridge Core to connect with your Dropbox account. Find out more about saving content to Dropbox.
To save this article to your Google Drive account, please select one or more formats and confirm that you agree to abide by our usage policies. If this is the first time you used this feature, you will be asked to authorise Cambridge Core to connect with your Google Drive account. Find out more about saving content to Google Drive.