Hostname: page-component-5c6d5d7d68-wtssw Total loading time: 0 Render date: 2024-08-17T03:19:21.609Z Has data issue: false hasContentIssue false
  • English
  • Français

Mechanical Properties and Microstructure of Certain Niaico(Hf) Alloys

Published online by Cambridge University Press:  28 February 2011

S. M. Russell ,
C. C Law ,
L. S. Lin  and
G. W. Levan
S. M. Russell
Affiliation:
Pratt and Whitney Aircraft, East Hartford, CT 06108
C. C Law
Affiliation:
Pratt and Whitney Aircraft, East Hartford, CT 06108
L. S. Lin
Affiliation:
Pratt and Whitney Aircraft, East Hartford, CT 06108
Get access

Abstract

Cobalt-modified NiAl alloys are being studied for their potential for room temperature ductility and toughness. An alloy of Ni - 29.3 a/o Al - 36.7 a/o Co has shown improved toughness and ductility with respect to binary NiAl alloys due in part to a stress-induced martensitic transformation. Furthermore, the cobalt additions have altered the slip behavior to {110}<111> type from {110} <001> for binary NiAl alloys. Hafnium was added to improve the alloy's relatively poor creep resistance and high temperature strength. Hf was found to be insoluble in the NiAlCo alloy and formed precipitates with a hexagonal structure. The Hfmodified alloy had improved high temperature strength. In addition, the Hf apparently changed the creep mechanism resulting in poorer creep resistance at low temperatures, but improved creep resistance at higher stresses and temperatures.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 186: Symposium I – Alloy Phase Stability and Design , 1990 , 289
Copyright
Copyright © Materials Research Society 1991

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Law, C. C. and Blackburn, M. J., “Rapidly Solidified Lightweight Durable Disk Material”, Air Force Report No. AFWAL-TR-87-4 102, 1987.Google Scholar
2. Miracle, D. B., Russell, S. M. and Law, C. C., “Slip System Modification in NiAI”, MRS Proceedings, 133, 225, (1989).Google Scholar
3. Grala, E. M., Mechanical Properties of Intermetallic Compounds, edited by Westbrook, J. H. (J. Wiley & Sons, Inc., New York, 1960).Google Scholar
4. Schulson, E. M., Presentation at NASA-COSAM Workshop, NASA-Lewis Research Center, Cleveland, Ohio, October 1982.Google Scholar
5. Russell, S. M., Law, C. C. and Blackburn, M. J., “The Effect of Cobalt on Martensitic Toughening Parameters in NiAI”, MRS Proceedings, 133, 627, (1989).Google Scholar
6. Enamni, K. et al. , Trans. Japan Inst. Metals, 22, 357, (1981).Google Scholar
7. Vedula, K., Pathare, V., Aslanidis, I., and Titran, R. H., MRS Proceedings, 39, 411, (1985).Google Scholar
8. Kaufman, L. and Nesor, H., Canad. Metall. Quart., 14, 221, (1975).Google Scholar
9. Yaney, D. L. and Nix, W. D., J. Mat. Sci., 23, 3088, (1988).Google Scholar
10. Vandervoort, R. R., Mukherjee, A. K. and Dorn, J. E., Trans. ASM, 59, 930, (1966).Google Scholar