Hostname: page-component-7bb8b95d7b-dvmhs Total loading time: 0 Render date: 2024-10-03T02:28:39.808Z Has data issue: false hasContentIssue false
  • English
  • Français

Mechanical Twinning in Duplex Ti-48Al-2Nb-2Cr at 1038K

Published online by Cambridge University Press:  01 January 1992

Zhe Jin  and
Thomas R. Bieler
Zhe Jin
Affiliation:
Department of Materials Science and Mechanics Michigan State University, East Lansing, Michigan 48824-1226
Thomas R. Bieler
Affiliation:
Department of Materials Science and Mechanics Michigan State University, East Lansing, Michigan 48824-1226
Get access

Abstract

As a part of an ongoing study of creep deformation mechanisms, mechanical twinning behavior was investigated in the lamellar region of a creep specimen. A multi-stress jump creep test was performed and the microstructures before and after deformation were investigated using optical and transmission electron microscopy. The identification of mechanical twins in a lamellar microstructure is discussed. Extensive mechanical twinning was observed in lamellar regions, in addition to slip and subgrain formation. The occurrence of mechanical twinning depended on the lamellar orientation with respect to the tensile axis. The mechanical twins are analyzed and discussed in terms of possible crystallographic twinning systems. In this case, a maximum resolved shear stress criterion for mechanical twinning is proposed to account for the observed orientations.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 288: Symposium L – High-Temperature Ordered Intermetallic Alloys V , 1992 , 775
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Shechtman, D., Blackburn, M.J. and Lipsitt, H.A., Metall. Trans., 5, 1373 (1974).Google Scholar
2. Lipsitt, H.A., Shechtman, D. and Schafrik, R.E., Metall. Trans., 6A, 1991 (1975).Google Scholar
3. Fujiwara, T., et al. , Phil. Mag., 61A, 591 (1990).Google Scholar
4. Wheeler, D.A., London, B., and Larsen, D.E. Jr., Scripta Metall., 26, 939 (1992).Google Scholar
5. Loiseau, A. and Lasalmonie, A., Mater. Sci. Eng., 67, 163 (1984).Google Scholar
6. Huang, J.S. and Kim, Y-W., Scripta Metall., 25, 1901 (1991).Google Scholar
7. Martin, P.L., Mendiratta, M.G., and Lipsitt, H.A., Metall. Trans., 14A, 2170 (1983).Google Scholar
8. Jin, Z., and Bieler, T.R., Scripta Metall., 27, 1301 (1992).Google Scholar
9. Jin, Z., unpublished research.Google Scholar
10. Kim, Y-W., in Microstructure/Property Relationships in Titanium Aluminides and Alloys, ed. by Kim, Y-W., and Boyer, Rodney R., (TMS, Warrendale PA 1990), p. 91.Google Scholar
11. Yamaguchi, M., and Umakoshi, Y., Prog. Mater. Sci., 34, 1 (1990).Google Scholar
12. Feng, C.R., Michel, D.J., and Crowe, C.R., Scripta Metall., 23, 1135 (1989).Google Scholar
13. Yamaguchi, M., Nishitani, S.R., and Shirai, Y., in High Temperature Aluminides & Intermetallics, ed. by Whang, S.H., Liu, C.T., Pope, C.P., and Stiegler, J.O., (TMS, Warrendale PA 1989), p. 63.Google Scholar
14. Klassen-Neklyudova, M.V., Mechanical Twinning of Crystals, (Consultants Bureau, New York, 1964).Google Scholar
15. Feng, C.R., et al. , in Mater. Res. Soc. Proc., Vol. 194, MRS, 1990, p. 219.Google Scholar
16. Schwartz, D.S., and Soboyejo, W.O., in Microstructure/Property Relationships in Titanium Aluminides and Alloys, ed. by Kim, Y-W., and Boyer, Rodney R., (TMS, Warrendale PA 1990), p. 65.Google Scholar