Hostname: page-component-5c6d5d7d68-wpx84 Total loading time: 0 Render date: 2024-08-06T15:16:54.042Z Has data issue: false hasContentIssue false
  • English
  • Français

Metallurgy and Microstructures of Pulse Melted Alloys*

Published online by Cambridge University Press:  15 February 2011

D. M. Follstaedt
D. M. Follstaedt*
Affiliation:
Sandia National Laboratories, Albuquerque, New Mexico 87185
Get access

Abstract

The microstructures found in pulse melted metals are reviewed. Epitaxial resolidification and the defects found in pure metals are discussed. Pulse melted alloys are then examined in order of increasing complexity. First, single phase alloys which solidify into metastable solid solutions are discussed. For higher concentrations and liquid-insoluble species, phase separation can occur, and the requirements for such separation are identified. If precipitation does not reduce the impurity concentration of the liquid, the liquid may be quenched to an amorphous solid. Comparisons of ion-implantation and pulse-melt produced amorphous alloys are given.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 4: Symposium A – Laser and Electron-Beam Interactions with Solids , 1981 , 377
Copyright
Copyright © Materials Research Society 1982

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Footnotes

*

This work performed at Sandia National Laboratories supported by the U.S. Department of Energy under contract number DE–AC04–76DP00789.

References

REFERENCES

1. Laser-Solid Interactions and Laser Processing – 1978, Ferris, S. D., Leamy, H. J. and Poate, J. M. eds. (AIP Conf. Proc. No. 50, New York 1979).Google Scholar
2. Laser and Electron Beam Processing of Materials, White, C. W. & Peercy, P. S. eds. (Academic Press, New York 1980).Google Scholar
3. Laser and Electron-Beam Solid Interactions and Materials Processing, Gibbons, J. F., Hess, L. D. and Sigmon, T. W. eds. (North-Holland, New York 1981).Google Scholar
4. Buene, L., Kaufmann, E. N., Preece, C. M. and Draper, C. W., in Ref. 3, p.591.Google Scholar
5. Follstaedt, D. M., Picraux, S. T. and Wampler, W. R., in Ref. 2, p. 708 .Google Scholar
6. Hirvonen, J. K., Poate, J. M., Greenwald, A. and Little, R., Appl. Phys. Lett. 36, 564 (1980).Google Scholar
7. Buene, L., Poate, J. M., Jacobsen, D. C., Draper, C. W. and Hirvonen, J. K., Appl. Phys. Lett. 37, 385 (1980).Google Scholar
8. Follstaedt, D. M., Picraux, S. T., Peercy, P. S. and Wampler, W. R., Appl. Phys. Lett. 39, 327 (1981).CrossRefGoogle Scholar
9. Wampler, W. R., Follstaedt, D. M. and Peercy, P. S., in Ref. 3, p. 567.Google Scholar
10. Follstaedt, D. M. and Wampler, W. R., Appl. Phys. Lett. 38, 140 (1981).CrossRefGoogle Scholar
11. Picraux, S. T., Rimini, E., Foti, G. and Campisano, S. U., Phys. Rev. B 18, 2078 (1978).CrossRefGoogle Scholar
12. Picraux, S. T. and Follstaedt, D. M., to be published.Google Scholar
13. Peercy, P. S., Follstaedt, D. M., Picraux, S. T. and Wampler, W. R., these proceedings.Google Scholar
14. Buene, L., Jacobson, D. C., Nakahara, S., Poate, J. M., Draper, C. W. and Hirvonen, J. K., in Ref. 3, p.583.Google Scholar
15. Draper, C. W., Buene, L., Poate, J. M. and Jacobsen, D. C., Appl. Optics 20, 1730 (1981).Google Scholar
16. Knapp, J. A. and Follstaedt, D. M., these proceedings.Google Scholar
17. Wampler, W. R., Follstaedt, D. M. and Picraux, S. T., Appl. Phys. Lett. 36, 366 (1980).CrossRefGoogle Scholar
18. Hansen, M., Constitution of Binary Alloys (McGraw-Hill, New York 1958).Google Scholar
19. Miotello, A. and Dona dalle Rose, L. F., these proceedings.Google Scholar
20. Picraux, S. T., Follstaedt, D. M., Knapp, J. A., Wampler, W. R. and Rimini, E., in Ref.3, p.575.Google Scholar
21. Draper, C. W. in Lasers in Metallurgy, eds. Mukherjee, K. and Mazumder, J. (TMS-AIME), Warrendale, Pa. to be published.Google Scholar
22. Rimini, E. and Baglin, J. E. E., Appl. Phys. Lett. 37, 481 (1980).Google Scholar
23. Jacobsen, D. C., Augustyniak, W. M., Buene, L., Poate, J. M. and Draper, C. W., IEEE Trans. on Nuc. Sci. NS–28, 1828 (1981).Google Scholar
24. Draper, C. W., Meyer, L. S., Buene, L., Jacobsen, D. C. and Poate, J. M., Appl. Surf. Sci. 7, 276 (1981).CrossRefGoogle Scholar
25. Pronko, P. P., Wiedersich, H., Seshan, K., Helling, A. L., Lograsso, T. A., Baldo, P. M., in Ref. 3, page 599.Google Scholar
26. Jain, A. K., Kulkarni, V. N., Sood, D. K., Sundarararaman, M. and Yadav, R. D. S., Nucl. Inst. and Meth. 168, 275(1980).CrossRefGoogle Scholar
27. Poate, J. M., J. Vac. Sci. Tech. 15, p. 1636 (1978); W. A. Grant, p.1644.Google Scholar
28. Cullis, A. G., Borders, J. A., Hirvonen, J. K. and Poate, J. M., Philos. Mag. B 37, 615 (1978).Google Scholar
29. Follstaedt, D. M. and Picraux, S. T., to be published.Google Scholar
30. Tonejc, A., Rocak, D. and Bonefacic, A., Acta Met. 19, 311 (1971).CrossRefGoogle Scholar