No CrossRef data available.
Article contents
A microstructural and electrical investigation of Pd/Ge/Ti/Au ohmic contact to n-type GaAs
Published online by Cambridge University Press: 15 February 2011
Abstract
Interfacial microstructure and elemental diffusion of Pd/Ge/Ti/Au ohmic contact to n-type GaAs have been investigated using x-ray diffraction(XRD), Auger electron spectroscopy(AES), and cross-sectional transmission electron microscopy(XTEM), and their results are used to interpret the electrical properties. The lowest contact resistance of 0.43 Ωmm is obtained after annealing at 380°C. The contact is thermally stable even after isothermal annealing for 5h at 400°C. The good Pd/Ge/Ti/Au ohmic contact is due to the formation of both AuGa and TiO compounds. The AuGa compound enhances the creation of more Ga vacancies, followed by incorporation of Ge into Ga vacancies and TiO compound suppresses As outdiffusion from GaAs substrate, respectively.
- Type
- Research Article
- Information
- Copyright
- Copyright © Materials Research Society 1996