Hostname: page-component-848d4c4894-cjp7w Total loading time: 0 Render date: 2024-07-02T16:17:18.632Z Has data issue: false hasContentIssue false
  • English
  • Français

Microstructural Evolution of Multilayered Oxide Scales on Stainless Steels

Published online by Cambridge University Press:  25 February 2011

S. N. Basu ,
D. Nath  and
J. Tebbets
S. N. Basu
Affiliation:
Department of Manufacturing Engineering, Boston University, Boston, MA.
D. Nath
Affiliation:
Visiting from Department of Mechanical Engineering, University of California, Berkeley, CA.
J. Tebbets
Affiliation:
Visiting from Department of Manufacturing Engineering, Worchester Polytechnic Institute, Worchester, MA.
Get access

Abstract

Si containing stainless steels form complex oxide scales during high temperature oxidation at 900°C. These scales consist of an outer iron chromium manganese spinel layer, an intermediate Cr2O3 (chromia) layer and an inner SiO2 (silica) layer. During isothermal oxidation, alloys exhibit minimum weight gain when the inner silica layer is continuous, due to its effectiveness as a diffusion barrier. This continuous silica scale can be formed in a short time only by a combination of fine alloy grain size and high silicon content. However, formation of a continuous silica layer may lead to scale spallation on cooling, thus having a deleterious effect on the oxidation resistance of the alloy.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 280: Symposium B – Evolution of Surface and Thin Film Microstructure , 1992 , 541
Copyright
Copyright © Materials Research Society 1993

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Handbook of Stainless Steels, Peckner, D. and Bernstein, I., eds., McGraw-Hill, NY (1977).Google Scholar
2. Kumar, A. and Douglass, D. L., Oxid. Metals 10 (1), 1 (1976).Google Scholar
3. Stott, F. H., Gabriel, G. J., Wei, F. I. and Wood, G. C., Werkstoffe und Korrosion 38, 521 (1987).Google Scholar
4. Basu, S. N. and Yurek, G. J., Oxid. Metals 36 (3/4), 281 (1991).Google Scholar