Hostname: page-component-77c89778f8-9q27g Total loading time: 0 Render date: 2024-07-22T04:34:24.940Z Has data issue: false hasContentIssue false
  • English
  • Français

A Microstructural Study of Iron Carbides Formed by Plasma-Enhanced Chemical Vapor Deposition (50–800 nm Thick)

Published online by Cambridge University Press:  03 September 2012

H. Siriwardane ,
W.J. James ,
O.A. Pringle  and
J.W. Newkirk
H. Siriwardane
Affiliation:
Departments of Physics, Graduate Center for Materials Research, University of Missouri-Rolla, Rolla, MO 65401 (U.S.A.)
W.J. James
Affiliation:
Departments of Chemistry, and Graduate Center for Materials Research, University of Missouri-Rolla, Rolla, MO 65401 (U.S.A.)
O.A. Pringle
Affiliation:
Departments of Physics, Graduate Center for Materials Research, University of Missouri-Rolla, Rolla, MO 65401 (U.S.A.)
J.W. Newkirk
Affiliation:
Departments of Metallurgical Engineering and the Graduate Center for Materials Research, University of Missouri-Rolla, Rolla, MO 65401 (U.S.A.)
Get access

Extract

Thin Mirror-like iron carbide films were prepared by introducing iron pentacarbonyl [Fe(CO)5] and hydrogen [H2] into a glow discharge. The deposition temperatures were varied from 200–500°C. The iron to carbon ratios of the resulting films were controlled by adjusting the gas flow ratios. The Microstructure and phase transformations occurring in these films were studied before and after annealing at 400°C for four hrs. Characterization techniques used included x-ray diffraction, electron diffraction, Auger spectroscopy and atomic force Microscopy.

X-ray diffraction data of plasma-deposited films on glass substrates maintained at 400°C showed the presence of only Fe3C. However, the x-ray diffraction data of films on carbon coated glass, and transmission electron microscopy selected area diffraction patterns of films on carbon coated copper grids indicated the presence of a second phase, the closely related Metastable Fe7C3, as well as small amounts of Fe3O4. Atomic force microscopy of crystallites on the surface of films deposited at 400°C and annealed at 400°C for four hours revealed a periodic structure of oblate spheroids. The Measured spacings and angle, when compared to projected models of high reticular density planes, suggested the surface to have a structure corresponding to that of bulk FesC or Fe3C or Fe7C3. However the data were not of sufficient quality to unambiguously determine such.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 313: Symposium Q1 – Magnetic Ultrathin Films, Multilayers and Surfaces/Magnetic Interfaces-Physics and Characterizations , 1993 , 425
Copyright
Copyright © Materials Research Society 1993

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Li, J. L., O'Keefe, T. J. and James, W. J., Mat. Sci. Eng. B7, 15–23 (1990); B7, 5–13 (1990).Google Scholar
2. Siriwardane, H., James, W. J., Pringle, O. A. and Newkirk, J. (to be published in Scripta Met.).Google Scholar
3. Grundy, P. J., J. Maen. Magn. Mater. 21, 1 (1980).Google Scholar
4. Putyatin, A. A., Sverkhtverdve Materiály 12, 22–29 (1990).Google Scholar
5. Lin, T. J., O'Keefe, T. J. and James, W. J., Mat. Sci. Eng. B5, 359–370 (1990).Google Scholar
6. Siriwardane, H., Newkirk, J., James, W. J. and Pringle, O.A. (to be published in Thin Solid Films).Google Scholar
7. Movchan, B. A. and Demchishin, A. V., Fiz. Met. Metalloved. 28, 83 (1969).Google Scholar
8. Thornton, J. A., Ann. Rev. Mat. Soc. 7, 239 (1969).Google Scholar
9. Govenor, C. R. M., Hentzell, H. T. G. and Smith, D. A., Acta Metall. 32, 773 (1984).Google Scholar
10. Siriwardane, H., Fraundorf, P., Fei, L., James, W. J., Newkirk, J. W. and Pringle, O. A. accepted for publication in MSA'93 proceedings.Google Scholar
11. Bourret, A., Thibault-Desseaux, J. and Seidman, D. N., J. Appl. Phys. 55, 825 (1984).Google Scholar
12. Fraundorf, P., Ultramicroscopy 22, 225–230 (1987).Google Scholar
13. Bernatowicz, T. J., “Lattice” - A Crystallography Utilities Program, Washington University, (1989).Google Scholar
14. Bouchaud, J.P., Ann. Chim., 2, 353–365 (1967).Google Scholar