Hostname: page-component-78c5997874-dh8gc Total loading time: 0 Render date: 2024-11-17T23:31:28.419Z Has data issue: false hasContentIssue false

Microstructure Analysis of Thermally Stable Ohmic Contact to Both n and p+-GaAs

Published online by Cambridge University Press:  25 February 2011

W. Y. Han
Affiliation:
Department of Electrical and Computer Engineering, Rutgers University, Piscataway, New Jersey 08855–0909
H. S. Lee
Affiliation:
Electronics Technology and Device Laboratory, U. S.Army, Fort Monmouth, New Jersey 07703–0500
Y. Lu
Affiliation:
Department of Electrical and Computer Engineering, Rutgers University, Piscataway, New Jersey 08855–0909
M. W. Cole
Affiliation:
Electronics Technology and Device Laboratory, U. S.Army, Fort Monmouth, New Jersey 07703–0500
L. M. Casas
Affiliation:
Electronics Technology and Device Laboratory, U. S.Army, Fort Monmouth, New Jersey 07703–0500
A. DeAnni
Affiliation:
Electronics Technology and Device Laboratory, U. S.Army, Fort Monmouth, New Jersey 07703–0500
K. A. Jones
Affiliation:
Electronics Technology and Device Laboratory, U. S.Army, Fort Monmouth, New Jersey 07703–0500
L. W. Yang
Affiliation:
Ford Microelectronics, Inc., 9965 Federal Drive, Colorado Spring, Colorado 80921
Get access

Abstract

A thermally stable Pd/Ge/Ti/Pt/ ohmic contact with low specific contact resistance was formed on both n and p+-GaAs. The lowest specific contact resistances were 4.7×10−7 and 6.4×10−7 Ω.cm2 for the n and p+-GaAs, respectively, when the n-GaAs was doped with Si to 2×1018cm−3, and the p+-GaAs was doped with carbon to 5×1019 cm−3. Interfacial reactions and element diffusions of the contacts were investigated by using transmission electron microscopy, Auger electron spectrometry with depth profiles. All the contacts were thermally stable at 300 °C for 20 hours, and it appeared that the p-contacts were more stable than the n-contacts.

Type
Research Article
Copyright
Copyright © Materials Research Society 1993

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Reference:

1. Braslau, N., Staples, J. L., Solid-State Electron, 10, 38 (1967).Google Scholar
2. Sands, T. and Wada, O., Jpn, J. Appl. Phys., 19L, 491 (1980).Google Scholar
3. Reemtsma, J. H. and Heime, K., Super Lattice and Microstructures, 4 197 (1988).Google Scholar
4. Gopen, H. J. and Yu, A. Y. C., Solid-State Electron 14, 515 (1971).Google Scholar
5. Marshall, E. D., Chen, W. X., Wu, C. S., Lau, S. S. and Kuech, T. F., Appl. Phys. Lett. 47, 298 (1985).Google Scholar
6. Katz, A., Abernathy, C. R., and Pearton, S. J., Appl. Phys. Lett. 56 12 (1990).Google Scholar
7. Han, W. Y., Lee, H. S., Lu, Y., Cole, M. W., Casas, L. M., DeAnni, A., Jones, K. A., and Yang, L. W., to be published in J. Appl. phys‥Google Scholar
8. Lin, J. C., Hsieh, K. C., Schulz, K. J., and Chang, Y. A., J. Mater. Res. 3, 148 (1988).Google Scholar
9. Palmstrom, C. J., Schwarz, S. A., Yablonovitch, E., Harbison, J. P., Schwartz, C. L., Gmitter, L. T., Marshall, E. D. and Lau, S. S., J. Appl. Phys., 67, 334 (1990)Google Scholar
10. Han, W. Y., Lu, Y., Lee, H. S., Cole, M. W., Schauer, S. N., Moerkirk, R. P., Jones, K. A., Appl. Phys. Lett. 61, 87 (1992).Google Scholar