Hostname: page-component-5c6d5d7d68-tdptf Total loading time: 0 Render date: 2024-08-22T05:40:25.647Z Has data issue: false hasContentIssue false
  • English
  • Français

Micro-Tribological Study of Cobalt Alloys with and Without a Carbon Coating

Published online by Cambridge University Press:  21 February 2011

Hsin-Fu Wang ,
John C. Nelson  and
William W. Gerberich
Hsin-Fu Wang
Affiliation:
Department of Materials Science and Engineering, University of Florida, Gainesville, Florida 32611
John C. Nelson
Affiliation:
Department of Chemical Engineering and Materials Science, University of Minnesota, Minneapolis, Minnesota 55455
William W. Gerberich
Affiliation:
Department of Chemical Engineering and Materials Science, University of Minnesota, Minneapolis, Minnesota 55455
Get access

Abstract

Continuous microscratch tests on an uncoated and a diamond-like carbon coated CoCrMo alloy were performed in air to evaluate the micro-friction and micro-tribology by utilizing a load and depth sensing instrument. By using a diamond-like carbon coating, the friction coefficient for a small applied load was found to decrease compared to the CoCrMo substrate. The hard diamond-like carbon coating prevents the local plastic yielding of the micro-contacts and the adhesion between the metal/metal surfaces during the microscratch tests. However, the effect of the diamond-like carbon coating on the friction was not seen when the applied load is high.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 356: Symposium B2 – Thin Films: Stresses and Mechanical Properties V , 1994 , 785
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Sioshanshi, P., Orthopaedics Today, 11, August (1991).Google Scholar
2. Taylor, S.K., Serekian, P. and Manley, M., Surface Modification Technology VI, ed Sudarshan, T.S. and Braza, J.F. (TMS Proceedings, PA, 1992), p. 313.Google Scholar
3. Poggie, R.A., Mishra, A.K., Davidson, J.A. and Wert, J.J., Surface Modification Technology VI, ed Sudarshan, T.S. and Braza, J.F. (TMS Proceedings, PA, 1992), p. 323.Google Scholar
4. Wu, T.W., Hwang, C., Lo, J. and Alexopoulos, P.S., Thin Solid Films, 166, 299 (1988).Google Scholar
5. Wang, H.F., Nelson, J.C. and Gerberich, W.W., J. Mater.Res., 9, 498 (1994).Google Scholar
6. Mizokawa, Y., Miyasato, T., Nakamura, S., Geib, K.M. and Wilmsen, C.W., J. Vac. Sci. Technol, A5, 2809 (1987).Google Scholar
7. Wangner, CD., Riggs, W.M., Davis, L.E. and Mouder, J.F., in “ Handbook of X-ray Photonelectron Spectroscopy ”, Physical Electronics Industries.Google Scholar
8. McFeely, F.R., Kowalczyk, S.P., Ley, L. Cavell, R.G., Pollak, P.A. and Shirley, D.A., Phys. Rev. B, 9, 5268 (1974).Google Scholar
9. Leder, L.B. and Suddeth, J.A., J. Appl. Phys., 31, 1422 (1960).Google Scholar
10. Ichikawa, Y.H., Phys. Rev.,109, 653 (1958).Google Scholar
11. Robertson, J. and O'Reilly, E.P., Phys. Rev. B, 35, 2946 (1987). Magn., 27, 5067 (1991).Google Scholar
12. Czichos, H., Tribology (Elsevier Scientific Publishing Company, NY, 1978), p.74.Google Scholar
13. Suh, N.P., Tribophysics (Prentice-Hall Inc, Englewood Cliffs, NJ, 1986), p.477.Google Scholar