Hostname: page-component-84b7d79bbc-g7rbq Total loading time: 0 Render date: 2024-07-25T15:01:21.960Z Has data issue: false hasContentIssue false

Miscibiuty in Blends of Polybenzimidazole and Fluorine Containing Polyimides

Published online by Cambridge University Press:  21 February 2011

Hiroaki Yamaoka
Affiliation:
Mitsubishi Monsanto Chemical Company, Yokkaichi Research & Development Dept. 1 Toho-Cho Yokkaichi-City, Mie, JAPAN
William J. MAcknight
Affiliation:
Polymer Science & Engineering Dept., University of Massachusetts, Amherst, MA 01003
Frank E. Karasz
Affiliation:
Polymer Science & Engineering Dept., University of Massachusetts, Amherst, MA 01003
Get access

Abstract

Blends of polybenzimidazole (PBI) with either of two fluorine-containing polyimides were prepared by casting from solution and by precipitation. Dynamic mechanical thermal analysis (DMTA) and differential scanning calorimetry (DSC) were used to study miscibility in the two blend systems.

The blends of PBI with the first polyimide, the polysulfonimide Pl-1, consisted of a single phase when the blends contained less than 30 wt% Pl-1; above 50 wt% Pl-1, phase separation occurred even at room temperature. The PBI blends containing the second polyimide, Pl-2, were immiscible.

Type
Research Article
Copyright
Copyright © Materials Research Society 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Leung, L., Williams, D. J., Karasz, F. E. and MacKnight, W. J., Polym. Bull. 16, 457 (1986).Google Scholar
2. Choe, S., MacKnight, W. J. and Karasz, F. E., in Polyimides: Materials Chemistry and Characterization ed. Feger, C., Khojasteh, M. M. and McGrath, J. E. (Elsevier, Amsterdam 1989).Google Scholar
3. Choe, S., MacKnight, W. J. and Karasz, F. E., in Multiphase Macromolecular Systems ed. Culbertson, B. M. (Plenum, New York, 1989).Google Scholar
4. Musto, P., Karasz, F. E. and MacKnight, W. J., Polymer 30, 1012 (1989).Google Scholar
5. Fox, T. G., Bull. Am. Phys. Soc. 1, 123 (1956).Google Scholar
6. Vogel, H. and Marvel, C. S., J. Polym. Sci. 50, 511 (1961).Google Scholar
7. Gilham, J. K., Science 495, 1257 (1963).Google Scholar