Hostname: page-component-77c89778f8-swr86 Total loading time: 0 Render date: 2024-07-18T03:06:30.070Z Has data issue: false hasContentIssue false

Modification of the Interfacial Zone Between Aggregate and Cement Paste

Published online by Cambridge University Press:  21 February 2011

Wu Xueqan
Affiliation:
Dept. of Silicate Engineering, Nanjing Institute of Chemical Technology, People's Republic of China
Li Dongxu
Affiliation:
Dept. of Silicate Engineering, Nanjing Institute of Chemical Technology, People's Republic of China
Wu Xiun
Affiliation:
Dept. of Silicate Engineering, Nanjing Institute of Chemical Technology, People's Republic of China
Tang Minshu
Affiliation:
Dept. of Silicate Engineering, Nanjing Institute of Chemical Technology, People's Republic of China
Get access

Abstract

In order to improve the properties of concrete, the composition and structure of the interfacial zone must be modified. This may be done by pretreating the inert aggregate with special reagents to form a reactive surface, which will then react with the cement paste, resulting in an enhancement of the bond strength between cement paste and aggregate through the combination of the physical, chemical and mechanical interlocking effects. A cylindrical hole was drilled in a limestone cake and the surface of the hole coated with special solutions; cement slurry was then poured into the hole and the specimens were cured in a fog room. The shearing strength was determined to evaluate the effect of the aggregate pretreatment on the bond strength. The mechanical strength, porosity, electric conductivity of the concrete, orientation degree of the Ca(OH)2 and morphology in the interfacial zone were also examined. It was found that the compressive and flexural strengths increased, and the bond strength between aggregate and cement paste also increased; the porosity, average pore size, number of large harmful pores, electric conductivity and the orientation index of the Ca(OH)2 decreased.

Type
Research Article
Copyright
Copyright © Materials Research Society 1988

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Maso, J.C.. 7th Inter. Congress on the Chem. of Cem., Vol. I VII-1/3–1/15, 1980, Paris.Google Scholar
2. Wu, Xuequan, Han, Sufen, Bian Qinghan and Tang Mingshu. 8th Inter. Congress on the Chem. of Cem., Vol. III, pp. 454459 (1986) Brazil.Google Scholar
3. Wu, Xuequan, Li, Dongxu, Bian, Qinghan, Guo, Liqun and Tang, Mingshu. Cem. Concr. Res. (in press) 1987.Google Scholar
4. Grandet, J., Farran, J. and Maso, J.C.. 7th Inter. Congress on the Chem. of Cem., Vol. III VII-63–68, 1980, Paris.Google Scholar