Hostname: page-component-84b7d79bbc-2l2gl Total loading time: 0 Render date: 2024-07-25T19:56:38.979Z Has data issue: false hasContentIssue false

Nanoporous Ceria Films Prepared from Colloidal Suspension

Published online by Cambridge University Press:  21 March 2011

Vladimir Petrovsky
Affiliation:
EMARC, University Missouri-Rolla, MO 65401.
Brian Gorman
Affiliation:
EMARC, University Missouri-Rolla, MO 65401.
Harlan U. Anderson
Affiliation:
EMARC, University Missouri-Rolla, MO 65401.
Tatiana Petrovsky
Affiliation:
EMARC, University Missouri-Rolla, MO 65401.
Get access

Abstract

The influence of porosity and densification on optical properties of films on sapphire substrates that were prepared from water colloidal suspensions of small (∼5nm) particles of ceria was investigated. The colloidal ceria films have initially very porous structure (porosity about 50%) and densification starts at about 600°oC accompanied by grain growth. The concurrence of these two processes makes it difficultto interpret the results of the optical spectrophotometry, but the combination of transmittance and reflectance measurements provides enough data to separate these two influences and to calculate the porosity, particlesize and energy band gap separately. XRD, SEM, ellipsometry and mechanical profilometry were used to confirm the results obtained from the specrophotometric measurements. All these methods gave results, which are in good agreement: the change in the porosity from 50% to 15% and the particle size increased from 5 to 65nm in the temperature region from 400 to 1000°oC. An important result of the investigation is the fact that the main optical properties of the coating such as refractive index and band gap energy depend only on the porosity, but not on the grain size. The grain size influences the scattering properties of the coating, which allows the grain size to be estimated from optical measurements.

Type
Research Article
Copyright
Copyright © Materials Research Society 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Petrovsky, V., Anderson, H., and Petrovsky, T., Mat.Res.Soc.Proc., 581, 553 (2000).Google Scholar
2. Petrovsky, V., Gorman, B., Anderson, H., and Petrovsky, T., J.Appl.Phys, submitted (2000).Google Scholar
3. Ulrich, R., J.Vac.Sci.Technol., 11, 156 (1974).Google Scholar
4. Kersten, R., Mahlein, H., and Rauscher, W., Thin Solid Films, 28, 369374 (1975).Google Scholar
5. Kosacki, I., Suzuki, T., Petrovsky, V., and Anderson, H., Solid State Ionics,1, 4, 127 (2000).Google Scholar
6. Chiang, Y., Lavik, E., Kosacki, I., Lee, J., and Tuller, H., J.Am.Ceram.Soc, 79, 1169 (1996).Google Scholar
7. Atanassov, G., Thielsch, R., and Popov, D., Thin Solid Films, 223, 288 (1993).Google Scholar
8. Kanakaraju, S., Mohan, S., and Sood, A., Thin Solid Films, 305, 191 (1997).Google Scholar
9. Azzam, R., and Bashara, N., Ellipsometry and Polarized Light, North-Holland Publishing Company, Amsterdam-New York-Oxford (1977).Google Scholar
10. Bohren, C., Huffman, D., Absorption and Scattering of the Light by Small Particles, A Wiley-Interscience publication, New York (1983).Google Scholar
11. Tsunekawa, S., Fukuda, T., and Kasuya, A., J.Appl.Phys., 87, 1318 (2000).Google Scholar
12. Kosacki, I., Petrovsky, V., and Anderson, H., Appl.Phys.Lett.,74, N3,341 (1999).Google Scholar
13. Nicolso, N., Lobert, A., and Leibold, B., Sens.Actuators, B 8, 253 (1992).Google Scholar