Hostname: page-component-78c5997874-dh8gc Total loading time: 0 Render date: 2024-11-19T16:51:03.230Z Has data issue: false hasContentIssue false
  • English
  • Français

Novel Design and Fabrication of Thermal Battery Cathodes Using Thermal Spray

Published online by Cambridge University Press:  15 February 2011

Hui Ye ,
Chris Strock ,
T. Danny Xiao ,
Peter R. Strutt ,
David E. Reisner ,
Ronald A. Guidotti  and
Frederick W. Reinhardt
Hui Ye
Affiliation:
US Nanocorp, Inc., North Haven, CT 06473-2342
Chris Strock
Affiliation:
US Nanocorp, Inc., North Haven, CT 06473-2342
T. Danny Xiao
Affiliation:
US Nanocorp, Inc., North Haven, CT 06473-2342
Peter R. Strutt
Affiliation:
US Nanocorp, Inc., North Haven, CT 06473-2342
David E. Reisner
Affiliation:
US Nanocorp, Inc., North Haven, CT 06473-2342
Ronald A. Guidotti
Affiliation:
Sandia National Laboratories, Albuquerque, NM 87185-0614
Frederick W. Reinhardt
Affiliation:
Sandia National Laboratories, Albuquerque, NM 87185-0614
Get access

Abstract

Li-Alloy/FeS2 thermal batteries are the predominant thermal battery chemistry today. Conventional electrodes are fabricated by cold pressing of powders. A better means of providing thin electrodes would dramatically increase volumetric and gravimetric energy densities and cost efficiency of thermal batteries. In this study, experiments were conducted on fabricating the cathode via high-velocity oxygen-fuel (HVOF) and dc-arc plasma thermal spray technique. The deposited films were characterized by cross-section examination using Scanning Electron Microscopy (SEM) and X-ray Diffraction. The thermal decomposition of pyrite was suppressed by a proprietary additive. The electrochemical test results showed that pyrite cathodes prepared by dc-arc plasma spraying with additives demonstrated better performance compared traditional pressed-powder electrodes.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 548: Symposia EE – Solid State Ionics V , 1998 , 701
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Tomczuk, Z., Tani, T., Otto, N.C., Roche, M.F., and Vissers, D.R., J Electrochem. Soc. 129(5) 925–932 (1992)Google Scholar
2. Guidotti, R.A. and Reinhardt, F.W., “Evaluation of Alternate Electrolytes for Use in Li(Si)/FeS2 Thermal Batteries,” Proc. 33rd Power Sources Symp., 1988, pp. 369–376 Google Scholar
3. Browning, J.A., J. Thermal Spray Tech., 1, 289 (1992)Google Scholar
4. Mutasim, Z. and Brentnall, W., Thermal Barrier Coating Workshop, (Clevelend, USA, 1995) P 103 Google Scholar
5. Ye, H., Xiao, T.D., Strutt, P.R., Strock, C.W., and Reisner, D.E., “Active Material Feeds for Thermal Spray Systems, Method of Manufacture and Thermal Sprayed Electrodes for Energy Storage and Conversion Devices Made Therefrom” U.S. Patent Appl. Filed June 9, 1998 Google Scholar
6. Guidotti, R., Doughty, D., Xiao, T.D. and Reisner, D.E., “Electrochemical Cell Containing Thermal Sprayed Electrodes” U.S. Patent Appl. Filed Nov. 2, 1998.Google Scholar
7. Guidotti, R.A., Reinhardt, F.W., Ye, H., Strock, C., Xiao, T.D., and Reisner, D.E. in Fundamental Gas-Phase and Surface Chemistry of Vapor-Phase Materials Synthesis Mountziaris, T.J. et al. , eds, (194th Electrochemical Society Meeting Proc., Boston, MA. 1998) in pressGoogle Scholar