Hostname: page-component-78c5997874-dh8gc Total loading time: 0 Render date: 2024-11-19T09:36:09.735Z Has data issue: false hasContentIssue false
  • English
  • Français

Optical Characterization Of Silicon Oxycarbide Thin Films

Published online by Cambridge University Press:  10 February 2011

D. M. Wolfe ,
F. Wang ,
B. J. Hinds  and
G. Lucovsky
D. M. Wolfe
Affiliation:
Departments of Materials Science and Engineering, Physics, North Carolina State University, Raleigh, North Carolina 27695–8202dmwolfe@eos.ncsu.edu and gerry_lucovsky@ncsu.edu
F. Wang
Affiliation:
Departments of Materials Science and Engineering, Physics, North Carolina State University, Raleigh, North Carolina 27695–8202dmwolfe@eos.ncsu.edu and gerry_lucovsky@ncsu.edu
B. J. Hinds
Affiliation:
Departments of Materials Science and Engineering, Physics, North Carolina State University, Raleigh, North Carolina 27695–8202dmwolfe@eos.ncsu.edu and gerry_lucovsky@ncsu.edu
G. Lucovsky
Affiliation:
Departments of Materials Science and Engineering, Physics, North Carolina State University, Raleigh, North Carolina 27695–8202dmwolfe@eos.ncsu.edu and gerry_lucovsky@ncsu.edu
Get access

Abstract

The local bonding environments in silicon oxycarbide thin films with different amounts of carbon were analyzed using the complementary optical techniques of Fourier transform infrared (FTIR) and Raman spectroscopies. Film formation was accomplished by low-temperature (250°C), plasma-enhanced CVD using SiH4, CH4 and O2 as the source gases. Control samples were also deposited using only SiH4 and CH4, and SiH4 and O2 source gases. The films were then subjected to rapid thermal annealing at 800, 900 and 1100 °C for 90 seconds. Results showed that carbon incorporation into the oxide hinders stoichiometric SiO2 formation upon annealing at 800 and 900 °C. Annealing at 1100 °C produced films which showed stoichiometric SiO2 formation. Phase separation into nano-crystalline silicon (<5 nm) and a mixture of amorphous silicon carbide and silicon oxide was also observed upon annealing, with crystallite size decreasing as the carbon content of the films was increased.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 483: Symposium E – Power Semiconductor Materials & Devices , 1997 , 203
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Horuetz, B., Michel, H-J., and Halbritter, J., J. Mater. Res. 9, 3088 (1994).Google Scholar
[2] Chaudhry, M.I., J. Mater. Res. 4, 404 (1989).Google Scholar
[3] DiMaria, D.J., Ghez, R., Dong, D.W., J. Appl. Phys. 51, 4830 (1980).Google Scholar
[4] Luthra, K.I., J. Am. Ceram. Soc. 74, 1095 (1991).Google Scholar
[5] Lipkin, L.A. and Palmour, J.W., J. Electronic Mater. 25, 909 (1996).Google Scholar
[6] Hinds, B.J., Wang, F., Wolfe, D.M., Hinkle, C.L. and Lucovsky, G., J. Non-Cryst. Solids, In press.Google Scholar
[7] Lucovsky, G., Tsu, D.V., Rudder, R.A. and Markunas, R.J., in Thin film Processes II, edited by Vossen, J.L. and Kern, W. (Academic Press, Inc., San Diego, 1991), pp. 565–619.Google Scholar
[8] Tsu, D.V., Lucovsky, G. and Davidson, B.N., Phys. Rev. B 40, 1795 (1989).Google Scholar
[9] Lucovsky, G. and Pollard, W.B., in The Physics of Hydrogenated Amorphous Silicon II, edited by Joannopoulos, J.D. and Lucovsky, G. (Springer-Verlag, Germany, 1984), pp. 301–355.10.1007/3540128077_7Google Scholar
[10] Iqbal, Z., Veprek, S., Webb, A.P. and Capezzuto, P., Solid State Comm. 37, 993 (1981).Google Scholar
[11] Feldman, D.W., Parker, J.H. Jr.,, Choyke, W.J. and Patrick, L., Phys. Rev. 173, 787 (1968).Google Scholar
[12] Nemanich, R.J., J. Vac. Sci Technol. A 6, 1783 (1988).Google Scholar