Hostname: page-component-5c6d5d7d68-xq9c7 Total loading time: 0 Render date: 2024-08-20T12:22:13.353Z Has data issue: false hasContentIssue false

Photo-Cvd Silicon Nitride for Gaas Mesfet Passivation

Published online by Cambridge University Press:  26 February 2011

R. Padmanabhan
Affiliation:
Physical Electronics & Packaging Laboratory, Semiconductor Research and Development Laboratory, Motorola, Inc., Mail Drop B-136, 5005 East McDowell, Phoenix, Az. 85008.
B. J. Miller
Affiliation:
Physical Electronics & Packaging Laboratory, Semiconductor Research and Development Laboratory, Motorola, Inc., Mail Drop B-136, 5005 East McDowell, Phoenix, Az. 85008.
G. Tam
Affiliation:
Compound Semiconductor Technology Center, Phoenix Corporate Research and Development Center, Motorola, Inc., Mail Drop A-170, 5005 East McDowell, Phoenix, Az. 85008.
Get access

Abstract

Silicon nitride films were deposited using a photochemical vapor deposition method. The defect density in these films was under 100/cm2 and the film adhesion was in excess of 104 psi. No lift-off was observed at power densities of up to 10 A/cm2 at applied voltages of up to 100. The film stress was compressive and under 5x103 psi. Total mobile ion concentration in the films did not exceed 109/cm2. Device analysis was carried out using Motorola dual gate MESFETs. Device degradation was evaluated in terms of surface potential sensitive parameters like source-drain current and resistance, by making comparisons in these parameters before and after passivation. Some degradation (up to 17 %) occurred in some of these parameters subsequent to device passivation. These results are comparable to or better than those encountered in most other low temperature films (like plasma enhanced CVD and polyimide films). The observed device properties are explained in terms of the film composition and the applicability of photo-CVD nitride films for MESFET passivation is discussed.

Type
Research Article
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1 Itoh, T. and Yanai, H., IEEE Trans. Electron Devices, ED–27 (6), 1037 (1980).Google Scholar
2 Sekido, K. and Arden, J. A., Microwave Systems News, 6 (2), 71 (1976).Google Scholar
3 Schuermeyer, F. L. and Singh, H. P., J. Vac. Sei. Technol., 19A (3), 421 (1981).Google Scholar
4 Chen, D. R., Cooke, H. F. and Wholey, J. N., Microwave J., 60 (1975).Google Scholar
5 Chen, D. R., Cooke, H. F. and Wholey, J. N. and Policky, G. T., IEEE ISSC Dig. Tech. Papers, 161 (1976).Google Scholar
6 Yamane, Y., Ishii, Y. and Mizutani, T., Jpn. J. Appl. Phys., 22 (6), L350, (1983).Google Scholar
7 Tenedorio, J. G. and Terzian, P. A., IEEE Electron Device Letters, EDL–5 (6), 199 (1984).Google Scholar
8 Padmanabhan, R. and Miller, B. J., J. Vac. Sei. Technol., 4A (3), 363 (1986).Google Scholar
9 Archer, R. J., J. Opt. Soc. Amer., 52, 970 (1962).Google Scholar
10 Padmanabhan, R., Miller, B. J., Deal, P. and Saha, N. C., Ext. Abst. 170th Fall Meeting of the Electrochem. Soc, San Diego, Ca., 86–2. 578, (1986).Google Scholar
11 Saha, N. C., Deal, P., Boyle, R. and Padmanabhan, R., Ext. Abst. 170th Fall Meeting of the Electrochem. Soc, San Diego, Ca., 86–2. 576, (1986).Google Scholar
12 Padmanabhan, R. and Saha, N. C., presented at the 33rd Nati. Symp. of the Amer. Vac. Soc, Baltimore, Md., 1986 (unpublished).Google Scholar