Hostname: page-component-84b7d79bbc-7nlkj Total loading time: 0 Render date: 2024-07-28T21:29:57.857Z Has data issue: false hasContentIssue false
  • English
  • Français

The Preparation and Characterization of Nanocrystalline Indium Tin Oxide Films

Published online by Cambridge University Press:  09 August 2011

J. Aikens ,
H. W. Sarkas  and
R. W. Brotzman Jr.
J. Aikens
Affiliation:
Nanophase Technologies Corporation, Burr Ridge, IL 60521
H. W. Sarkas
Affiliation:
Nanophase Technologies Corporation, Burr Ridge, IL 60521
R. W. Brotzman Jr.
Affiliation:
Nanophase Technologies Corporation, Burr Ridge, IL 60521
Get access

Abstract

Nanocrystalline indium tin oxide (ITO) powder is prepared by gas phase condensation (GPC) and used to produce conductive optical coatings. Materials produced by GPC are commercially available at reasonable cost and bridge the gap between basic science and product development. Nanocrystalline ITO films are transparent (>95%), conductive, and offer distinct device processing advantages. The oxidation state and surface chemistry of ITO may be tailored for particular applications and offers a flexible, affordable alternative to competitive films. The preparation and characterization of nanocrystalline ITO films and device applications will be discussed.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 536: Symposium F – Microcrystalline & Nanocrystalline Semiconductors - 1998 , 1998 , 377
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Meng, L. J., Macarico, A., and Martins, R., Vacuum, 46,673–680 (1990).Google Scholar
2. Vink, T. J., Walrave, W., Daams, J. L. C., Baarslag, P. C., and Meerakker, J. E. A. M. Van den, Solid Thin Films, 266, 145–151 (1995).Google Scholar
3. Maruyama, T., and Fukui, K., J. Appl. Phys., 70, 3848–3851 (1991).Google Scholar
4. Maruyama, T., Tabata, K., Jpn. J. Appl. Phys., 29, 355–357 (1990).Google Scholar
5. Kawata, M., and Yukinobu, M., U. S. Patent No., 5,662,962 (2 September 1997).Google Scholar
6. Furusaki, T., Takahashi, J., and Kodaira, K., J. Am. Ceram. Soc., 102, 200–204 (1994).Google Scholar
7. Hashimoto, T., Yoshitake, H., Yokoyama, H., and Nakazono, A., U. S. Patent No., 4,594,182 (10 June 1986).Google Scholar
8. Parker, J. C., Ali, M., and Lympany, B. B., U. S. Patent No., 5,514,349 (7 May 1996).Google Scholar
9. Muronchi, M., Hayashi, T., and Nishihara, A., U. S. Patent No., 5,504,133 (2 April 1996).Google Scholar