Hostname: page-component-5c6d5d7d68-wbk2r Total loading time: 0 Render date: 2024-09-01T16:21:55.500Z Has data issue: false hasContentIssue false
  • English
  • Français

The Production of Modulus Gradients at Interfaces

Published online by Cambridge University Press:  21 February 2011

Andrew Garton ,
Gautam Haldankar  and
Edward Shockey
Andrew Garton
Affiliation:
Polymer Program and Chemistry Department, University of Connecticut, Box U-136, Storrs, CT 06269-3136
Gautam Haldankar
Affiliation:
Polymer Program and Chemistry Department, University of Connecticut, Box U-136, Storrs, CT 06269-3136
Edward Shockey
Affiliation:
Polymer Program and Chemistry Department, University of Connecticut, Box U-136, Storrs, CT 06269-3136
Get access

Abstract

We have developed a range of “antiplasticizing” additives for epoxy and polyimide resins which can increase the modulus of the cured polymers by > 40%, increase their tensile and shear strengths, modify their fracture behavior, and decrease their water uptake. These additives may be used alone or in conjunction with rubber modifiers. The optimum additive formulations are complex mixtures, but we describe here two relatively pure model systems. The epoxy additive is the reaction product of 4-hydroxyacetanilide (HAA) and vinylcyclohexene dioxide (VCD), while the polyimide additive is the reaction product of epoxyphenoxypropane (EPP) and HAA. These additives are mixed with the epoxy resin and curing agent (or polyamic acid solution in the case of polyimides), before curing, and the mixture is then cured in the conventional fashion. We describe here some physical properties of the modified epoxies and polyimides and their use in adhesive formulations. These materials offer the potential for constructing modulus gradients at interfaces through their use as primers, so as to allow testing of the many hypotheses concerning desirable interphase properties. Some initial experiments in this area are described.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 170: Symposium N – Interfaces in Composites , 1989 , 291
Copyright
Copyright © Materials Research Society 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. McLean, P.D., Garton, A., Scott, R.F. and Gransden, S.E., US Patent 4,480,082Google Scholar
2. McLean, P.D., Garton, A. and Scott, R.F., US Patent 4,739,028Google Scholar
3. Daly, J., Britten, A., Garton, A. and McLean, P.D., J.Appl.Polym.Sci., 29,1403 (1984)Google Scholar
4. Garton, A., McLean, P.D., Stevenson, W., Clark, J.N. and Daly, J.H. Polym.Eng.and Sci., 27,1620 (1987)Google Scholar
5. Garton, A., Haldankar, G. and McLean, P.D., J. Adhesion, 29,13 (1989)Google Scholar
6. Drzal, L.T., Rich, M.J., Koenig, M.F. and Lloyd, P.F., J.Adhesion, 16,133 (1983)Google Scholar
7. Schonhorn, H. and Ryan, F.W., Adv.Chem.Ser., 87,140 (1968)Google Scholar
8. Chang, J., Bell, J.P. and Joseph, R., SAMPE Quarterly, 18,39 (1987)Google Scholar
9. Piggott, M.R., Polymer Composites, 8,291 (1987)Google Scholar
10. McCarvill, W. and Bell, J.P., J. Adhesion, 6,185 (1974)Google Scholar