Hostname: page-component-7bb8b95d7b-dtkg6 Total loading time: 0 Render date: 2024-09-16T19:35:35.443Z Has data issue: false hasContentIssue false

Properties and Production Mechanism of Low-Temperature Deposited CAT-CVD Poly-Silicon films

Published online by Cambridge University Press:  28 February 2011

Hideki Matsumura
Affiliation:
Japan Advanced Institute of Science and Technology (JAIST) Hokuriku, Tatsunokuchi, Ishikawa-ken 923–12, Japan
Yoichi Hosoda
Affiliation:
Tokyo Institute of Technology, Department of Applied Electronics, Nagatsuda, Midori-ku, Yokohama 227, Japan
Seijiro Furukawa
Affiliation:
Tokyo Institute of Technology, Department of Applied Electronics, Nagatsuda, Midori-ku, Yokohama 227, Japan
Get access

Abstract

Poly-silicon films are obtained at temperatures as low as 400 °C by the catalytic chemical vapor deposition (cat-CVD) method, in which deposition gases are decomposed by the catalytic or pyrolytic reactions with a heated catalyzer near substrates. It is found that there are roughly two modes of deposition conditions such as low gas pressure mode and high gas pressure mode for obtaining poly-silicon films, and also that the Hall mobility of the cat-CVD poly-silicon films of low gas pressure mode sometimes exceeds over 100 cm2/Vs.

Type
Research Article
Copyright
Copyright © Materials Research Society 1993

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Serikawa, T., Shirai, S., Okamoto, A. and Suyama, S., IEEE Trans. Electron Devices, ED–36, 1929 (1989)Google Scholar
2. Usui, S., Sameshima, T. and Hara, M., Optoelectronics, 4, 235 (1989)Google Scholar
3. Matsumura, H., J. Appl. Phys., 65, 4396 (1989)Google Scholar
4. Matsumura, H., Jpn. J. Appl. Phys., 30. Ll 522 (1991)Google Scholar
5. Matsumura, H., Proc. of 1991 Int. Semiconductor Devices Res. Symp.(ISDRS), Dec. 1991, Charlottesville, (School of Eng. and Appl. Sci., Virginia Univ., 1991) p521 Google Scholar
6. Kamins, T., in Polycrystalli ne Silicon for Integrated Circuit Application (Kluwer Academic Pub., Boston, 1988) Chap.5 Google Scholar
7. Shirai, S. and Serikawa, T., IEEE Trans. Electron Devices, ED–39, 450 (1992)Google Scholar