Hostname: page-component-77c89778f8-cnmwb Total loading time: 0 Render date: 2024-07-18T22:26:22.189Z Has data issue: false hasContentIssue false
  • English
  • Français

Pulse Applications of Electrochemical Cells Containing Insertion Reaction Electrodes

Published online by Cambridge University Press:  16 February 2011

Robert A. Huggins
Robert A. Huggins*
Affiliation:
Center for Solar Energy and Hydrogen Research, Helmholtzstr. 8, D-89081 Ulm, Germany
Get access

Abstract

There is a rapidly increasing interest in energy sources optimized to provide electrical energy at high power levels for short times. Applications include very short pulses for digital electronic devices, the somewhat longer power pulse demands of some implantable medical devices, and the much larger transient power needs in connection with vehicle traction.

Several mechanisms can be used to provide short term energy, with fundamentally different characteristics and applicability to different types of transient output requirements.

Four different electrochemical methods can be used to evaluate the critical materials parameters in insertion reaction materials that might be applicable to such applications, and spreadsheet techniques can be used to model the transient transport behavior of such electrodes under various conditions. LaPlace transform methods can then be used to convert information about the physical mechanisms and parameters of individual components into the dynamic response of an electrochemical system.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 369: Symposium U – Solid State Ionics IV , 1994 , 3
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

references

[1] Conway, B. E., “Transition From ‘Supercapacitor’ to ‘Battery’ Behavior in Electrochemical Energy Storage”, J. Electrochem. Soc. 138, 1539 (1991).Google Scholar
[2] Conway, B. E., “Origin and Significance of “Redox Supercapacitance” and its Manifestation at Various Inorganic Materials”, in Proceedings of Symposium on New Sealed Rechargeable Batteries and Supercapacitors, Barnett, B. M., Dowgiallo, E., Halpert, G., Matsuda, Y. and Takeharas, Z., Eds., The Electrochemical Society (1993), p. 15.Google Scholar
[3] Nishino, A., “Development and Current Status of Electric Double Layer Capacitors”, in Proceedings of Symposium on New Sealed Rechargeable Batteries and Supercapacitors, Barnett, B. M., Dowgiallo, E., Halpert, G., Matsuda, Y. and Takeharas, Z., Eds. The Electrochemical Society (1993), p. 1.Google Scholar
[4] Craig, D. R., Canadian Patent 1,196,683 (1985).Google Scholar
[5] Craig, D. R., “Electric Energy Storage Devices”, European Patent Application 82,109,061.0, submitted 30 September, 1982, Publication No. 0 078 404, 11 May 1983 Google Scholar
[6] Boukamp, B. A., Lesh, G. C. and Huggins, R. A., “All-Solid Lithium Electrodes with Mixed-Conductor Matrix”, J. Electrochem. Soc. 128, 725 (1981).Google Scholar
[7] Liebert, B. E., Weppner, W. and Huggins, R. A., “Evaluation of Lithium Titanates as Cathode Material”, in Proceedings of Symposium on Electrode Materials and Processes for Energy Conversion and Storage, Maclntyre, J.D.E., Srinivasan, S., Will, F. G., Eds. Electrochem. Soc. (1977), p. 821.Google Scholar
[8] Raistrick, I. D., Mark, A. J. and Huggins, R. A., “Thermodynamics and Kinetics of the Electrochemical Insertion of Lithium Into Tungsten Bronzes”, Solid State Ionics 5, 351 (1981).Google Scholar
[9] Weppner, W., and Huggins, R. A., “Determination of the Kinetic Parameters of Mixed-Conducting Electrodes and Application to the System Li3Sb”, J. Electrochem. Soc. 124, 1569 (1977).Google Scholar
[10] Weppner, W. and Huggins, R. A., “Electrochemical Methods for Determining Kinetic Properties of Solids” in Annual Review of Materials Science, Huggins, R. A., Ed. Annual Reviews, Inc. (1978), p. 269.Google Scholar
[11] Ho, C., Raistrick, I. D. and Huggins, R. A., “Application of AC Techniques to the Study of Lithium Diffusion in Tungsten Trioxide Films”, J. Electrochem. Soc. 127, 343 (1980).Google Scholar
[12] Wen, C. J., Ho, C., Boukamp, B.A., Raistrick, I.D., Weppner, W., and Huggins, R.A., “Use of Electrochemical Methods to Determine Chemical Diffusion Coefficients in Alloys: Application to ‘LiAl“’, International Metals Reviews 5, 253 (1981).Google Scholar
[13] Wagner, C., “Investigations on Silver Sulphide”, J. Chem. Phys. 21, 1819 (1953).Google Scholar
[14] L'vov, A. L. et al. , Elektrokhimiya 11, 1322 (1975).Google Scholar
[15] Raistrick, I. D. and Huggins, R. A., “The Transient Response of Electrochemical Systems Containing Insertion Reaction Electrodes”, Solid State Ionics 7, 213 (1982).Google Scholar
[16] Raistrick, I. D. and Sherman, R. J., “Electrical Response of Electrochemical Capacitors Based on High Surface Area Ruthenium Oxide Electrodes”, in Proceedings of Symposium on Electrode Materials and Processes for Energy Conversion and Storage, Srinivasan, S., Wagner, S., and Wroblowa, H., Eds. Electrochem. Soc. (1987), p. 582.Google Scholar