Hostname: page-component-77c89778f8-9q27g Total loading time: 0 Render date: 2024-07-24T08:10:34.688Z Has data issue: false hasContentIssue false
  • English
  • Français

Pulsed Laser Deposition of Thin Metallic Multilayers and Amorphous Films

Published online by Cambridge University Press:  01 January 1992

Hans-Ulrich Krebs  and
Olaf Bremert
Hans-Ulrich Krebs
Affiliation:
Institut für Metallphysik, University of Göttingen, Hospitalstraße 3–7, 3400 Göttingen, and Sonderforschungsbereich 345, F. R. Germany
Olaf Bremert
Affiliation:
Institut für Metallphysik, University of Göttingen, Hospitalstraße 3–7, 3400 Göttingen, and Sonderforschungsbereich 345, F. R. Germany
Get access

Abstract

The method of pulsed excimer laser ablation using KrF radiation was applied for the deposition of thin metallic elementary multilayers. Above an ablation threshold of about 5 J/cm2 an ‘explosive’ evaporation of the metallic targets occurs leading to high deposition rates of up to 5 nm/s. For different metals, the ablation threshold slightly varies leading at the same laser fluence to different growth rates as shown for Ag, Fe, Zr and Nb. By using two elementary targets and adjusting the dwelling times on both targets, Fe/Ag, Fe/Zr and Fe/Nb multilayers of different bilayer thicknesses were deposited. While Fe/Ag superstructures show crystalline phases down to a periodicity of 1 nm, Fe/Zr and Fe/Nb films are amorphous at such wavelengths. On the other side, Fe/Nb multilayers can also be amorphized by a solid state interdiffusion reaction of the elementary multilayers. The surfaces of the grown films are smooth except for a small number of droplets on the film surface.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 285: Symposium I – Laser Ablation in Materials Processing–Fundamentals and Applications , 1992 , 527
Copyright
Copyright © Materials Research Society 1993

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Bhat, P. K., Dubowski, J. J., and Williams, D. F., Appl. Phys. Lett. 47, 1085 (1985).Google Scholar
2.See, for example, Dai, C. M., Su, C. S., and Chuu, D. S., J. Appl. Phys. 69, 3766 (1991).Google Scholar
3. Wu, X. D., Inam, A., Venkatesan, T., Chang, C. C., Barboux, P., Tarascon, J. M., and Wilkens, B., Appl. Phys. Lett. 52, 754 (1988).Google Scholar
4. Witanachchi, S., Kwok, H. S., Wang, X. M., and Shaw, D. T., Appl. Phys. Lett. 53, 243 (1988).Google Scholar
5. Krebs, H. U., Krauns, Ch., Yang, X., and Geyer, U., Appl. Phys. Lett. 59, 2180 (1991).Google Scholar
6. Krebs, H. U. and Bremert, O., submitted to Appl. Phys. Lett. Google Scholar
7. Bormann, R., Gartner, F., and Zoltzer, K., J. Less-Common Met. 145, 19 (1988).Google Scholar
8. Clemens, B. M., Phys. Rev. B 33, 7615 (1986).Google Scholar
9. Schwarz, R. B. and Johnson, W. L., Phys. Rev. Lett. S1, 415 (1983).Google Scholar
10. Johnson, W. L., Progr. Mat. Science 30, 81 (1986).Google Scholar
11. Grey, D. E., American Institute of Physics Handbook, 3rd ed. (McGraw-Hill, New-York 1972), p. 6–118.Google Scholar