Hostname: page-component-7bb8b95d7b-pwrkn Total loading time: 0 Render date: 2024-10-04T11:09:50.780Z Has data issue: false hasContentIssue false
  • English
  • Français

Rapid Isothermal Annealing of Si Implanted Semi-Insulating GaAs by Means of High Frequency Induction Heating.

Published online by Cambridge University Press:  15 February 2011

A. Cetronio ,
M. Bujatti ,
P. D'eustacchio  and
S. Ciceroni
A. Cetronio
Affiliation:
Selenia S.P.A., Research Laboratories, Via Tiburtina, 131 Roma, Italy.
M. Bujatti
Affiliation:
Selenia S.P.A., Research Laboratories, Via Tiburtina, 131 Roma, Italy.
P. D'eustacchio
Affiliation:
Selenia S.P.A., Research Laboratories, Via Tiburtina, 131 Roma, Italy.
S. Ciceroni
Affiliation:
Selenia S.P.A., Research Laboratories, Via Tiburtina, 131 Roma, Italy.
Get access

Abstract

Experimental results obtained by rapid isothermal annealing of Si implanted semi-insulating GaAs are presented and compared with results obtained by electron-beam and conventional furnace annealing. We shall show that for high Cr-doped material the problem of redistribution cannot be avoided and that for undoped material, this technique yields very good activation (near 100%) and high mobility (approximately 4400 cm2 /V.sec).

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 13 , 1982 , 641
Copyright
Copyright © Materials Research Society 1983

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Footnotes

*

Present address: Santa Rosa Technology Ctr., Hewlett-Packard, Santa Rosa, CA

References

REFERENCES

1.Golecki, I., Nicolet, M.A., Maenpaa, M., Tandom, J.L., Kirkpatric, C.G., Sadana, D.K. and Washburn, J., in Laser and Electron Beam Processing of Materials, Edited by White, C.W. and Peercy, P.S., Academic Press, New York (1980) p.347.Google Scholar
2.Eisen, F.H., in Laser and Electron Beam Processing of Materials, Edited by White, C.W. and Peercy, P.S., Academic Press, New York (1980), p.309.Google Scholar
3.Bujatti, M., Cetronio, A., Nipoti, R. and Olzi, E., Appl. Phys. Lett. 40(4), 334 (1982).Google Scholar
4.Chapman, R.L., Fan, John C.C., Donnelly, J.P. and Tsaur, B.Y., Appl. Phys. Lett. 40(9), 805 (1982).Google Scholar
5.Pucel, R.A. and Krumm, C.F., Electronics Letters 12, 240 (1976).Google Scholar
6. SIMS analysis by Charles Evans and Associates.Google Scholar
7.Bujatti, M. and Marcelja, F., IEEE Proc., 128 Pt., 97 (1981).Google Scholar